- 根目录:
- drivers
- acpi
- acpica
- nspredef.c
/******************************************************************************
*
* Module Name: nspredef - Validation of ACPI predefined methods and objects
* $Revision: 1.1 $
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define ACPI_CREATE_PREDEFINED_TABLE
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#include "acpredef.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nspredef")
/*******************************************************************************
*
* This module validates predefined ACPI objects that appear in the namespace,
* at the time they are evaluated (via acpi_evaluate_object). The purpose of this
* validation is to detect problems with BIOS-exposed predefined ACPI objects
* before the results are returned to the ACPI-related drivers.
*
* There are several areas that are validated:
*
* 1) The number of input arguments as defined by the method/object in the
* ASL is validated against the ACPI specification.
* 2) The type of the return object (if any) is validated against the ACPI
* specification.
* 3) For returned package objects, the count of package elements is
* validated, as well as the type of each package element. Nested
* packages are supported.
*
* For any problems found, a warning message is issued.
*
******************************************************************************/
/* Local prototypes */
static acpi_status
acpi_ns_check_package(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr);
static acpi_status
acpi_ns_check_package_list(struct acpi_predefined_data *data,
const union acpi_predefined_info *package,
union acpi_operand_object **elements, u32 count);
static acpi_status
acpi_ns_check_package_elements(struct acpi_predefined_data *data,
union acpi_operand_object **elements,
u8 type1,
u32 count1,
u8 type2, u32 count2, u32 start_index);
static acpi_status
acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index);
static acpi_status
acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object);
static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes);
/*
* Names for the types that can be returned by the predefined objects.
* Used for warning messages. Must be in the same order as the ACPI_RTYPEs
*/
static const char *acpi_rtype_names[] = {
"/Integer",
"/String",
"/Buffer",
"/Package",
"/Reference",
};
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_predefined_names
*
* PARAMETERS: Node - Namespace node for the method/object
* user_param_count - Number of parameters actually passed
* return_status - Status from the object evaluation
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
* RETURN: Status
*
* DESCRIPTION: Check an ACPI name for a match in the predefined name list.
*
******************************************************************************/
acpi_status
acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
u32 user_param_count,
acpi_status return_status,
union acpi_operand_object **return_object_ptr)
{
union acpi_operand_object *return_object = *return_object_ptr;
acpi_status status = AE_OK;
const union acpi_predefined_info *predefined;
char *pathname;
struct acpi_predefined_data *data;
/* Match the name for this method/object against the predefined list */
predefined = acpi_ns_check_for_predefined_name(node);
/* Get the full pathname to the object, for use in warning messages */
pathname = acpi_ns_get_external_pathname(node);
if (!pathname) {
return AE_OK; /* Could not get pathname, ignore */
}
/*
* Check that the parameter count for this method matches the ASL
* definition. For predefined names, ensure that both the caller and
* the method itself are in accordance with the ACPI specification.
*/
acpi_ns_check_parameter_count(pathname, node, user_param_count,
predefined);
/* If not a predefined name, we cannot validate the return object */
if (!predefined) {
goto cleanup;
}
/*
* If the method failed or did not actually return an object, we cannot
* validate the return object
*/
if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) {
goto cleanup;
}
/*
* If there is no return value, check if we require a return value for
* this predefined name. Either one return value is expected, or none,
* for both methods and other objects.
*
* Exit now if there is no return object. Warning if one was expected.
*/
if (!return_object) {
if ((predefined->info.expected_btypes) &&
(!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Missing expected return value"));
status = AE_AML_NO_RETURN_VALUE;
}
goto cleanup;
}
/*
* Return value validation and possible repair.
*
* 1) Don't perform return value validation/repair if this feature
* has been disabled via a global option.
*
* 2) We have a return value, but if one wasn't expected, just exit,
* this is not a problem. For example, if the "Implicit Return"
* feature is enabled, methods will always return a value.
*
* 3) If the return value can be of any type, then we cannot perform
* any validation, just exit.
*/
if (acpi_gbl_disable_auto_repair ||
(!predefined->info.expected_btypes) ||
(predefined->info.expected_btypes == ACPI_RTYPE_ALL)) {
goto cleanup;
}
/* Create the parameter data block for object validation */
data = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_predefined_data));
if (!data) {
goto cleanup;
}
data->predefined = predefined;
data->node = node;
data->node_flags = node->flags;
data->pathname = pathname;
/*
* Check that the type of the main return object is what is expected
* for this predefined name
*/
status = acpi_ns_check_object_type(data, return_object_ptr,
predefined->info.expected_btypes,
ACPI_NOT_PACKAGE_ELEMENT);
if (ACPI_FAILURE(status)) {
goto exit;
}
/*
* For returned Package objects, check the type of all sub-objects.
* Note: Package may have been newly created by call above.
*/
if ((*return_object_ptr)->common.type == ACPI_TYPE_PACKAGE) {
data->parent_package = *return_object_ptr;
status = acpi_ns_check_package(data, return_object_ptr);
if (ACPI_FAILURE(status)) {
goto exit;
}
}
/*
* The return object was OK, or it was successfully repaired above.
* Now make some additional checks such as verifying that package
* objects are sorted correctly (if required) or buffer objects have
* the correct data width (bytes vs. dwords). These repairs are
* performed on a per-name basis, i.e., the code is specific to
* particular predefined names.
*/
status = acpi_ns_complex_repairs(data, node, status, return_object_ptr);
exit:
/*
* If the object validation failed or if we successfully repaired one
* or more objects, mark the parent node to suppress further warning
* messages during the next evaluation of the same method/object.
*/
if (ACPI_FAILURE(status) || (data->flags & ACPI_OBJECT_REPAIRED)) {
node->flags |= ANOBJ_EVALUATED;
}
ACPI_FREE(data);
cleanup:
ACPI_FREE(pathname);
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_parameter_count
*
* PARAMETERS: Pathname - Full pathname to the node (for error msgs)
* Node - Namespace node for the method/object
* user_param_count - Number of args passed in by the caller
* Predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
* DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a
* predefined name is what is expected (i.e., what is defined in
* the ACPI specification for this predefined name.)
*
******************************************************************************/
void
acpi_ns_check_parameter_count(char *pathname,
struct acpi_namespace_node *node,
u32 user_param_count,
const union acpi_predefined_info *predefined)
{
u32 param_count;
u32 required_params_current;
u32 required_params_old;
/* Methods have 0-7 parameters. All other types have zero. */
param_count = 0;
if (node->type == ACPI_TYPE_METHOD) {
param_count = node->object->method.param_count;
}
if (!predefined) {
/*
* Check the parameter count for non-predefined methods/objects.
*
* Warning if too few or too many arguments have been passed by the
* caller. An incorrect number of arguments may not cause the method
* to fail. However, the method will fail if there are too few
* arguments and the method attempts to use one of the missing ones.
*/
if (user_param_count < param_count) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Insufficient arguments - needs %u, found %u",
param_count, user_param_count));
} else if (user_param_count > param_count) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Excess arguments - needs %u, found %u",
param_count, user_param_count));
}
return;
}
/*
* Validate the user-supplied parameter count.
* Allow two different legal argument counts (_SCP, etc.)
*/
required_params_current = predefined->info.param_count & 0x0F;
required_params_old = predefined->info.param_count >> 4;
if (user_param_count != ACPI_UINT32_MAX) {
if ((user_param_count != required_params_current) &&
(user_param_count != required_params_old)) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Parameter count mismatch - "
"caller passed %u, ACPI requires %u",
user_param_count,
required_params_current));
}
}
/*
* Check that the ASL-defined parameter count is what is expected for
* this predefined name (parameter count as defined by the ACPI
* specification)
*/
if ((param_count != required_params_current) &&
(param_count != required_params_old)) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname, node->flags,
"Parameter count mismatch - ASL declared %u, ACPI requires %u",
param_count, required_params_current));
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_for_predefined_name
*
* PARAMETERS: Node - Namespace node for the method/object
*
* RETURN: Pointer to entry in predefined table. NULL indicates not found.
*
* DESCRIPTION: Check an object name against the predefined object list.
*
******************************************************************************/
const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
acpi_namespace_node
*node)
{
const union acpi_predefined_info *this_name;
/* Quick check for a predefined name, first character must be underscore */
if (node->name.ascii[0] != '_') {
return (NULL);
}
/* Search info table for a predefined method/object name */
this_name = predefined_names;
while (this_name->info.name[0]) {
if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) {
return (this_name);
}
/*
* Skip next entry in the table if this name returns a Package
* (next entry contains the package info)
*/
if (this_name->info.expected_btypes & ACPI_RTYPE_PACKAGE) {
this_name++;
}
this_name++;
}
return (NULL); /* Not found */
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package
*
* PARAMETERS: Data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
* RETURN: Status
*
* DESCRIPTION: Check a returned package object for the correct count and
* correct type of all sub-objects.
*
******************************************************************************/
static acpi_status
acpi_ns_check_package(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr)
{
union acpi_operand_object *return_object = *return_object_ptr;
const union acpi_predefined_info *package;
union acpi_operand_object **elements;
acpi_status status = AE_OK;
u32 expected_count;
u32 count;
u32 i;
ACPI_FUNCTION_NAME(ns_check_package);
/* The package info for this name is in the next table entry */
package = data->predefined + 1;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"%s Validating return Package of Type %X, Count %X\n",
data->pathname, package->ret_info.type,
return_object->package.count));
/*
* For variable-length Packages, we can safely remove all embedded
* and trailing NULL package elements
*/
acpi_ns_remove_null_elements(data, package->ret_info.type,
return_object);
/* Extract package count and elements array */
elements = return_object->package.elements;
count = return_object->package.count;
/* The package must have at least one element, else invalid */
if (!count) {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Package has no elements (empty)"));
return (AE_AML_OPERAND_VALUE);
}
/*
* Decode the type of the expected package contents
*
* PTYPE1 packages contain no subpackages
* PTYPE2 packages contain sub-packages
*/
switch (package->ret_info.type) {
case ACPI_PTYPE1_FIXED:
/*
* The package count is fixed and there are no sub-packages
*
* If package is too small, exit.
* If package is larger than expected, issue warning but continue
*/
expected_count =
package->ret_info.count1 + package->ret_info.count2;
if (count < expected_count) {
goto package_too_small;
} else if (count > expected_count) {
ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
"%s: Return Package is larger than needed - "
"found %u, expected %u\n",
data->pathname, count,
expected_count));
}
/* Validate all elements of the returned package */
status = acpi_ns_check_package_elements(data, elements,
package->ret_info.
object_type1,
package->ret_info.
count1,
package->ret_info.
object_type2,
package->ret_info.
count2, 0);
break;
case ACPI_PTYPE1_VAR:
/*
* The package count is variable, there are no sub-packages, and all
* elements must be of the same type
*/
for (i = 0; i < count; i++) {
status = acpi_ns_check_object_type(data, elements,
package->ret_info.
object_type1, i);
if (ACPI_FAILURE(status)) {
return (status);
}
elements++;
}
break;
case ACPI_PTYPE1_OPTION:
/*
* The package count is variable, there are no sub-packages. There are
* a fixed number of required elements, and a variable number of
* optional elements.
*
* Check if package is at least as large as the minimum required
*/
expected_count = package->ret_info3.count;
if (count < expected_count) {
goto package_too_small;
}
/* Variable number of sub-objects */
for (i = 0; i < count; i++) {
if (i < package->ret_info3.count) {
/* These are the required package elements (0, 1, or 2) */
status =
acpi_ns_check_object_type(data, elements,
package->
ret_info3.
object_type[i],
i);
if (ACPI_FAILURE(status)) {
return (status);
}
} else {
/* These are the optional package elements */
status =
acpi_ns_check_object_type(data, elements,
package->
ret_info3.
tail_object_type,
i);
if (ACPI_FAILURE(status)) {
return (status);
}
}
elements++;
}
break;
case ACPI_PTYPE2_REV_FIXED:
/* First element is the (Integer) revision */
status = acpi_ns_check_object_type(data, elements,
ACPI_RTYPE_INTEGER, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
elements++;
count--;
/* Examine the sub-packages */
status =
acpi_ns_check_package_list(data, package, elements, count);
break;
case ACPI_PTYPE2_PKG_COUNT:
/* First element is the (Integer) count of sub-packages to follow */
status = acpi_ns_check_object_type(data, elements,
ACPI_RTYPE_INTEGER, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
/*
* Count cannot be larger than the parent package length, but allow it
* to be smaller. The >= accounts for the Integer above.
*/
expected_count = (u32) (*elements)->integer.value;
if (expected_count >= count) {
goto package_too_small;
}
count = expected_count;
elements++;
/* Examine the sub-packages */
status =
acpi_ns_check_package_list(data, package, elements, count);
break;
case ACPI_PTYPE2:
case ACPI_PTYPE2_FIXED:
case ACPI_PTYPE2_MIN:
case ACPI_PTYPE2_COUNT:
case ACPI_PTYPE2_FIX_VAR:
/*
* These types all return a single Package that consists of a
* variable number of sub-Packages.
*
* First, ensure that the first element is a sub-Package. If not,
* the BIOS may have incorrectly returned the object as a single
* package instead of a Package of Packages (a common error if
* there is only one entry). We may be able to repair this by
* wrapping the returned Package with a new outer Package.
*/
if (*elements
&& ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
/* Create the new outer package and populate it */
status =
acpi_ns_wrap_with_package(data, return_object,
return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Update locals to point to the new package (of 1 element) */
return_object = *return_object_ptr;
elements = return_object->package.elements;
count = 1;
}
/* Examine the sub-packages */
status =
acpi_ns_check_package_list(data, package, elements, count);
break;
default:
/* Should not get here if predefined info table is correct */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Invalid internal return type in table entry: %X",
package->ret_info.type));
return (AE_AML_INTERNAL);
}
return (status);
package_too_small:
/* Error exit for the case with an incorrect package count */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Package is too small - found %u elements, expected %u",
count, expected_count));
return (AE_AML_OPERAND_VALUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package_list
*
* PARAMETERS: Data - Pointer to validation data structure
* Package - Pointer to package-specific info for method
* Elements - Element list of parent package. All elements
* of this list should be of type Package.
* Count - Count of subpackages
*
* RETURN: Status
*
* DESCRIPTION: Examine a list of subpackages
*
******************************************************************************/
static acpi_status
acpi_ns_check_package_list(struct acpi_predefined_data *data,
const union acpi_predefined_info *package,
union acpi_operand_object **elements, u32 count)
{
union acpi_operand_object *sub_package;
union acpi_operand_object **sub_elements;
acpi_status status;
u32 expected_count;
u32 i;
u32 j;
/*
* Validate each sub-Package in the parent Package
*
* NOTE: assumes list of sub-packages contains no NULL elements.
* Any NULL elements should have been removed by earlier call
* to acpi_ns_remove_null_elements.
*/
for (i = 0; i < count; i++) {
sub_package = *elements;
sub_elements = sub_package->package.elements;
data->parent_package = sub_package;
/* Each sub-object must be of type Package */
status = acpi_ns_check_object_type(data, &sub_package,
ACPI_RTYPE_PACKAGE, i);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Examine the different types of expected sub-packages */
data->parent_package = sub_package;
switch (package->ret_info.type) {
case ACPI_PTYPE2:
case ACPI_PTYPE2_PKG_COUNT:
case ACPI_PTYPE2_REV_FIXED:
/* Each subpackage has a fixed number of elements */
expected_count =
package->ret_info.count1 + package->ret_info.count2;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
status =
acpi_ns_check_package_elements(data, sub_elements,
package->ret_info.
object_type1,
package->ret_info.
count1,
package->ret_info.
object_type2,
package->ret_info.
count2, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
case ACPI_PTYPE2_FIX_VAR:
/*
* Each subpackage has a fixed number of elements and an
* optional element
*/
expected_count =
package->ret_info.count1 + package->ret_info.count2;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
status =
acpi_ns_check_package_elements(data, sub_elements,
package->ret_info.
object_type1,
package->ret_info.
count1,
package->ret_info.
object_type2,
sub_package->package.
count -
package->ret_info.
count1, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
case ACPI_PTYPE2_FIXED:
/* Each sub-package has a fixed length */
expected_count = package->ret_info2.count;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
/* Check the type of each sub-package element */
for (j = 0; j < expected_count; j++) {
status =
acpi_ns_check_object_type(data,
&sub_elements[j],
package->
ret_info2.
object_type[j],
j);
if (ACPI_FAILURE(status)) {
return (status);
}
}
break;
case ACPI_PTYPE2_MIN:
/* Each sub-package has a variable but minimum length */
expected_count = package->ret_info.count1;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
/* Check the type of each sub-package element */
status =
acpi_ns_check_package_elements(data, sub_elements,
package->ret_info.
object_type1,
sub_package->package.
count, 0, 0, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
case ACPI_PTYPE2_COUNT:
/*
* First element is the (Integer) count of elements, including
* the count field (the ACPI name is num_elements)
*/
status = acpi_ns_check_object_type(data, sub_elements,
ACPI_RTYPE_INTEGER,
0);
if (ACPI_FAILURE(status)) {
return (status);
}
/*
* Make sure package is large enough for the Count and is
* is as large as the minimum size
*/
expected_count = (u32)(*sub_elements)->integer.value;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
if (sub_package->package.count <
package->ret_info.count1) {
expected_count = package->ret_info.count1;
goto package_too_small;
}
if (expected_count == 0) {
/*
* Either the num_entries element was originally zero or it was
* a NULL element and repaired to an Integer of value zero.
* In either case, repair it by setting num_entries to be the
* actual size of the subpackage.
*/
expected_count = sub_package->package.count;
(*sub_elements)->integer.value = expected_count;
}
/* Check the type of each sub-package element */
status =
acpi_ns_check_package_elements(data,
(sub_elements + 1),
package->ret_info.
object_type1,
(expected_count - 1),
0, 0, 1);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
default: /* Should not get here, type was validated by caller */
return (AE_AML_INTERNAL);
}
elements++;
}
return (AE_OK);
package_too_small:
/* The sub-package count was smaller than required */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Sub-Package[%u] is too small - found %u elements, expected %u",
i, sub_package->package.count, expected_count));
return (AE_AML_OPERAND_VALUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package_elements
*
* PARAMETERS: Data - Pointer to validation data structure
* Elements - Pointer to the package elements array
* Type1 - Object type for first group
* Count1 - Count for first group
* Type2 - Object type for second group
* Count2 - Count for second group
* start_index - Start of the first group of elements
*
* RETURN: Status
*
* DESCRIPTION: Check that all elements of a package are of the correct object
* type. Supports up to two groups of different object types.
*
******************************************************************************/
static acpi_status
acpi_ns_check_package_elements(struct acpi_predefined_data *data,
union acpi_operand_object **elements,
u8 type1,
u32 count1,
u8 type2, u32 count2, u32 start_index)
{
union acpi_operand_object **this_element = elements;
acpi_status status;
u32 i;
/*
* Up to two groups of package elements are supported by the data
* structure. All elements in each group must be of the same type.
* The second group can have a count of zero.
*/
for (i = 0; i < count1; i++) {
status = acpi_ns_check_object_type(data, this_element,
type1, i + start_index);
if (ACPI_FAILURE(status)) {
return (status);
}
this_element++;
}
for (i = 0; i < count2; i++) {
status = acpi_ns_check_object_type(data, this_element,
type2,
(i + count1 + start_index));
if (ACPI_FAILURE(status)) {
return (status);
}
this_element++;
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_object_type
*
* PARAMETERS: Data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
* expected_btypes - Bitmap of expected return type(s)
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
* otherwise)
*
* RETURN: Status
*
* DESCRIPTION: Check the type of the return object against the expected object
* type(s). Use of Btype allows multiple expected object types.
*
******************************************************************************/
static acpi_status
acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index)
{
union acpi_operand_object *return_object = *return_object_ptr;
acpi_status status = AE_OK;
u32 return_btype;
char type_buffer[48]; /* Room for 5 types */
/*
* If we get a NULL return_object here, it is a NULL package element.
* Since all extraneous NULL package elements were removed earlier by a
* call to acpi_ns_remove_null_elements, this is an unexpected NULL element.
* We will attempt to repair it.
*/
if (!return_object) {
status = acpi_ns_repair_null_element(data, expected_btypes,
package_index,
return_object_ptr);
if (ACPI_SUCCESS(status)) {
return (AE_OK); /* Repair was successful */
}
goto type_error_exit;
}
/* A Namespace node should not get here, but make sure */
if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Invalid return type - Found a Namespace node [%4.4s] type %s",
return_object->node.name.ascii,
acpi_ut_get_type_name(return_object->node.
type)));
return (AE_AML_OPERAND_TYPE);
}
/*
* Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type.
* The bitmapped type allows multiple possible return types.
*
* Note, the cases below must handle all of the possible types returned
* from all of the predefined names (including elements of returned
* packages)
*/
switch (return_object->common.type) {
case ACPI_TYPE_INTEGER:
return_btype = ACPI_RTYPE_INTEGER;
break;
case ACPI_TYPE_BUFFER:
return_btype = ACPI_RTYPE_BUFFER;
break;
case ACPI_TYPE_STRING:
return_btype = ACPI_RTYPE_STRING;
break;
case ACPI_TYPE_PACKAGE:
return_btype = ACPI_RTYPE_PACKAGE;
break;
case ACPI_TYPE_LOCAL_REFERENCE:
return_btype = ACPI_RTYPE_REFERENCE;
break;
default:
/* Not one of the supported objects, must be incorrect */
goto type_error_exit;
}
/* Is the object one of the expected types? */
if (return_btype & expected_btypes) {
/* For reference objects, check that the reference type is correct */
if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
status = acpi_ns_check_reference(data, return_object);
}
return (status);
}
/* Type mismatch -- attempt repair of the returned object */
status = acpi_ns_repair_object(data, expected_btypes,
package_index, return_object_ptr);
if (ACPI_SUCCESS(status)) {
return (AE_OK); /* Repair was successful */
}
type_error_exit:
/* Create a string with all expected types for this predefined object */
acpi_ns_get_expected_types(type_buffer, expected_btypes);
if (package_index == ACPI_NOT_PACKAGE_ELEMENT) {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return type mismatch - found %s, expected %s",
acpi_ut_get_object_type_name
(return_object), type_buffer));
} else {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Package type mismatch at index %u - "
"found %s, expected %s", package_index,
acpi_ut_get_object_type_name
(return_object), type_buffer));
}
return (AE_AML_OPERAND_TYPE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_reference
*
* PARAMETERS: Data - Pointer to validation data structure
* return_object - Object returned from the evaluation of a
* method or object
*
* RETURN: Status
*
* DESCRIPTION: Check a returned reference object for the correct reference
* type. The only reference type that can be returned from a
* predefined method is a named reference. All others are invalid.
*
******************************************************************************/
static acpi_status
acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object)
{
/*
* Check the reference object for the correct reference type (opcode).
* The only type of reference that can be converted to an union acpi_object is
* a reference to a named object (reference class: NAME)
*/
if (return_object->reference.class == ACPI_REFCLASS_NAME) {
return (AE_OK);
}
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return type mismatch - unexpected reference object type [%s] %2.2X",
acpi_ut_get_reference_name(return_object),
return_object->reference.class));
return (AE_AML_OPERAND_TYPE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_get_expected_types
*
* PARAMETERS: Buffer - Pointer to where the string is returned
* expected_btypes - Bitmap of expected return type(s)
*
* RETURN: Buffer is populated with type names.
*
* DESCRIPTION: Translate the expected types bitmap into a string of ascii
* names of expected types, for use in warning messages.
*
******************************************************************************/
static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes)
{
u32 this_rtype;
u32 i;
u32 j;
j = 1;
buffer[0] = 0;
this_rtype = ACPI_RTYPE_INTEGER;
for (i = 0; i < ACPI_NUM_RTYPES; i++) {
/* If one of the expected types, concatenate the name of this type */
if (expected_btypes & this_rtype) {
ACPI_STRCAT(buffer, &acpi_rtype_names[i][j]);
j = 0; /* Use name separator from now on */
}
this_rtype <<= 1; /* Next Rtype */
}
}