- 根目录:
- arch
- arm
- mach-exynos4
- mach-universal_c210.c
/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/max8952.h>
#include <linux/mmc/host.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/sdhci.h>
#include <mach/map.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG256 | \
S5PV210_UFCON_RXTRIG256)
static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.ucon = UNIVERSAL_UCON_DEFAULT,
.ulcon = UNIVERSAL_ULCON_DEFAULT,
.ufcon = UNIVERSAL_UFCON_DEFAULT,
},
};
static struct regulator_consumer_supply max8952_consumer =
REGULATOR_SUPPLY("vddarm", NULL);
static struct max8952_platform_data universal_max8952_pdata __initdata = {
.gpio_vid0 = EXYNOS4_GPX0(3),
.gpio_vid1 = EXYNOS4_GPX0(4),
.gpio_en = -1, /* Not controllable, set "Always High" */
.default_mode = 0, /* vid0 = 0, vid1 = 0 */
.dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
.sync_freq = 0, /* default: fastest */
.ramp_speed = 0, /* default: fastest */
.reg_data = {
.constraints = {
.name = "VARM_1.2V",
.min_uV = 770000,
.max_uV = 1400000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
.boot_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &max8952_consumer,
},
};
static struct regulator_consumer_supply lp3974_buck1_consumer =
REGULATOR_SUPPLY("vddint", NULL);
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
.name = "VINT_1.1V",
.min_uV = 750000,
.max_uV = 1500000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck1_consumer,
};
static struct regulator_init_data lp3974_buck2_data = {
.constraints = {
.name = "VG3D_1.1V",
.min_uV = 750000,
.max_uV = 1500000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck2_consumer,
};
static struct regulator_init_data lp3974_buck3_data = {
.constraints = {
.name = "VCC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_buck4_data = {
.constraints = {
.name = "VMEM_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo2_data = {
.constraints = {
.name = "VALIVE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo3_data = {
.constraints = {
.name = "VUSB+MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo4_data = {
.constraints = {
.name = "VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo5_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo6_data = {
.constraints = {
.name = "LDO6",
.min_uV = 2000000,
.max_uV = 2000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo7_data = {
.constraints = {
.name = "VLCD+VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo8_data = {
.constraints = {
.name = "VUSB+VDAC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo9_data = {
.constraints = {
.name = "VCC_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.boot_on = 1,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo11_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo12_data = {
.constraints = {
.name = "PS_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo13_data = {
.constraints = {
.name = "VHIC_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo14_data = {
.constraints = {
.name = "CAM_I_HOST_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo15_data = {
.constraints = {
.name = "CAM_S_DIG+FM33_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo16_data = {
.constraints = {
.name = "CAM_S_ANA_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_ldo17_data = {
.constraints = {
.name = "VCC_3.0V_LCD",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.boot_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_32khz_ap_data = {
.constraints = {
.name = "32KHz AP",
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_32khz_cp_data = {
.constraints = {
.name = "32KHz CP",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_vichg_data = {
.constraints = {
.name = "VICHG",
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data lp3974_esafeout1_data = {
.constraints = {
.name = "SAFEOUT1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data lp3974_esafeout2_data = {
.constraints = {
.name = "SAFEOUT2",
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.enabled = 1,
},
},
};
static struct max8998_regulator_data lp3974_regulators[] = {
{ MAX8998_LDO2, &lp3974_ldo2_data },
{ MAX8998_LDO3, &lp3974_ldo3_data },
{ MAX8998_LDO4, &lp3974_ldo4_data },
{ MAX8998_LDO5, &lp3974_ldo5_data },
{ MAX8998_LDO6, &lp3974_ldo6_data },
{ MAX8998_LDO7, &lp3974_ldo7_data },
{ MAX8998_LDO8, &lp3974_ldo8_data },
{ MAX8998_LDO9, &lp3974_ldo9_data },
{ MAX8998_LDO10, &lp3974_ldo10_data },
{ MAX8998_LDO11, &lp3974_ldo11_data },
{ MAX8998_LDO12, &lp3974_ldo12_data },
{ MAX8998_LDO13, &lp3974_ldo13_data },
{ MAX8998_LDO14, &lp3974_ldo14_data },
{ MAX8998_LDO15, &lp3974_ldo15_data },
{ MAX8998_LDO16, &lp3974_ldo16_data },
{ MAX8998_LDO17, &lp3974_ldo17_data },
{ MAX8998_BUCK1, &lp3974_buck1_data },
{ MAX8998_BUCK2, &lp3974_buck2_data },
{ MAX8998_BUCK3, &lp3974_buck3_data },
{ MAX8998_BUCK4, &lp3974_buck4_data },
{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
{ MAX8998_ENVICHG, &lp3974_vichg_data },
{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
};
static struct max8998_platform_data universal_lp3974_pdata = {
.num_regulators = ARRAY_SIZE(lp3974_regulators),
.regulators = lp3974_regulators,
.buck1_voltage1 = 1100000, /* INT */
.buck1_voltage2 = 1000000,
.buck1_voltage3 = 1100000,
.buck1_voltage4 = 1000000,
.buck1_set1 = EXYNOS4_GPX0(5),
.buck1_set2 = EXYNOS4_GPX0(6),
.buck2_voltage1 = 1200000, /* G3D */
.buck2_voltage2 = 1100000,
.buck1_default_idx = 0,
.buck2_set3 = EXYNOS4_GPE2(0),
.buck2_default_idx = 0,
.wakeup = true,
};
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
{
I2C_BOARD_INFO("max8952", 0xC0 >> 1),
.platform_data = &universal_max8952_pdata,
}, {
I2C_BOARD_INFO("lp3974", 0xCC >> 1),
.platform_data = &universal_lp3974_pdata,
},
};
/* GPIO KEYS */
static struct gpio_keys_button universal_gpio_keys_tables[] = {
{
.code = KEY_VOLUMEUP,
.gpio = EXYNOS4_GPX2(0), /* XEINT16 */
.desc = "gpio-keys: KEY_VOLUMEUP",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_VOLUMEDOWN,
.gpio = EXYNOS4_GPX2(1), /* XEINT17 */
.desc = "gpio-keys: KEY_VOLUMEDOWN",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_CONFIG,
.gpio = EXYNOS4_GPX2(2), /* XEINT18 */
.desc = "gpio-keys: KEY_CONFIG",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_CAMERA,
.gpio = EXYNOS4_GPX2(3), /* XEINT19 */
.desc = "gpio-keys: KEY_CAMERA",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_OK,
.gpio = EXYNOS4_GPX3(5), /* XEINT29 */
.desc = "gpio-keys: KEY_OK",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data universal_gpio_keys_data = {
.buttons = universal_gpio_keys_tables,
.nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
};
static struct platform_device universal_gpio_keys = {
.name = "gpio-keys",
.dev = {
.platform_data = &universal_gpio_keys_data,
},
};
/* eMMC */
static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_DISABLE),
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct regulator_consumer_supply mmc0_supplies[] = {
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
};
static struct regulator_init_data mmc0_fixed_voltage_init_data = {
.constraints = {
.name = "VMEM_VDD_2.8V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
.consumer_supplies = mmc0_supplies,
};
static struct fixed_voltage_config mmc0_fixed_voltage_config = {
.supply_name = "MASSMEMORY_EN",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE1(3),
.enable_high = true,
.init_data = &mmc0_fixed_voltage_init_data,
};
static struct platform_device mmc0_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &mmc0_fixed_voltage_config,
},
};
/* SD */
static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_DISABLE,
.ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
.ext_cd_gpio_invert = 1,
.cd_type = S3C_SDHCI_CD_GPIO,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
/* WiFi */
static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_DISABLE,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
};
static void __init universal_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
}
/* I2C0 */
static struct i2c_board_info i2c0_devs[] __initdata = {
/* Camera, To be updated */
};
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
static struct platform_device *universal_devices[] __initdata = {
/* Samsung Platform Devices */
&mmc0_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c5,
/* Universal Devices */
&universal_gpio_keys,
&s5p_device_onenand,
};
static void __init universal_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
static void __init universal_machine_init(void)
{
universal_sdhci_init();
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
s3c_i2c5_set_platdata(NULL);
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
/* Last */
platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.timer = &exynos4_timer,
MACHINE_END