/*
* tty.c - code for handling serial ports in pppd.
*
* Copyright (C) 2000-2004 Paul Mackerras. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. The name(s) of the authors of this software must not be used to
* endorse or promote products derived from this software without
* prior written permission.
*
* 3. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by Paul Mackerras
* <paulus@samba.org>".
*
* THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
* THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
* AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
* OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* Portions derived from main.c, which is:
*
* Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. The name "Carnegie Mellon University" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For permission or any legal
* details, please contact
* Office of Technology Transfer
* Carnegie Mellon University
* 5000 Forbes Avenue
* Pittsburgh, PA 15213-3890
* (412) 268-4387, fax: (412) 268-7395
* tech-transfer@andrew.cmu.edu
*
* 4. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by Computing Services
* at Carnegie Mellon University (http://www.cmu.edu/computing/)."
*
* CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
* THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
* FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
* AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
* OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define RCSID "$Id: tty.c,v 1.27 2008/07/01 12:27:56 paulus Exp $"
#include <stdio.h>
#include <ctype.h>
#include <stdlib.h>
#include <string.h>
#include <termios.h>
#include <unistd.h>
#include <signal.h>
#include <errno.h>
#include <fcntl.h>
#include <syslog.h>
#include <netdb.h>
#include <utmp.h>
#include <pwd.h>
#include <setjmp.h>
#include <sys/param.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/stat.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include "pppd.h"
#include "fsm.h"
#include "lcp.h"
void tty_process_extra_options __P((void));
void tty_check_options __P((void));
int connect_tty __P((void));
void disconnect_tty __P((void));
void tty_close_fds __P((void));
void cleanup_tty __P((void));
void tty_do_send_config __P((int, u_int32_t, int, int));
static int setdevname __P((char *, char **, int));
static int setspeed __P((char *, char **, int));
static int setxonxoff __P((char **));
static int setescape __P((char **));
static void printescape __P((option_t *, void (*)(void *, char *,...),void *));
static void finish_tty __P((void));
static int start_charshunt __P((int, int));
static void stop_charshunt __P((void *, int));
static void charshunt_done __P((void *));
static void charshunt __P((int, int, char *));
static int record_write __P((FILE *, int code, u_char *buf, int nb,
struct timeval *));
static int open_socket __P((char *));
static void maybe_relock __P((void *, int));
static int pty_master; /* fd for master side of pty */
static int pty_slave; /* fd for slave side of pty */
static int real_ttyfd; /* fd for actual serial port (not pty) */
static int ttyfd; /* Serial port file descriptor */
static char speed_str[16]; /* Serial port speed as string */
mode_t tty_mode = (mode_t)-1; /* Original access permissions to tty */
int baud_rate; /* Actual bits/second for serial device */
char *callback_script; /* script for doing callback */
int charshunt_pid; /* Process ID for charshunt */
int locked; /* lock() has succeeded */
struct stat devstat; /* result of stat() on devnam */
/* option variables */
int crtscts = 0; /* Use hardware flow control */
int stop_bits = 1; /* Number of serial port stop bits */
bool modem = 1; /* Use modem control lines */
int inspeed = 0; /* Input/Output speed requested */
bool lockflag = 0; /* Create lock file to lock the serial dev */
char *initializer = NULL; /* Script to initialize physical link */
char *connect_script = NULL; /* Script to establish physical link */
char *disconnect_script = NULL; /* Script to disestablish physical link */
char *welcomer = NULL; /* Script to run after phys link estab. */
char *ptycommand = NULL; /* Command to run on other side of pty */
bool notty = 0; /* Stdin/out is not a tty */
char *record_file = NULL; /* File to record chars sent/received */
int max_data_rate; /* max bytes/sec through charshunt */
bool sync_serial = 0; /* Device is synchronous serial device */
char *pty_socket = NULL; /* Socket to connect to pty */
int using_pty = 0; /* we're allocating a pty as the device */
extern uid_t uid;
extern int kill_link;
extern int asked_to_quit;
extern int got_sigterm;
/* XXX */
extern int privopen; /* don't lock, open device as root */
u_int32_t xmit_accm[8]; /* extended transmit ACCM */
/* option descriptors */
option_t tty_options[] = {
/* device name must be first, or change connect_tty() below! */
{ "device name", o_wild, (void *) &setdevname,
"Serial port device name",
OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC,
devnam},
{ "tty speed", o_wild, (void *) &setspeed,
"Baud rate for serial port",
OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str },
{ "lock", o_bool, &lockflag,
"Lock serial device with UUCP-style lock file", OPT_PRIO | 1 },
{ "nolock", o_bool, &lockflag,
"Don't lock serial device", OPT_PRIOSUB | OPT_PRIV },
{ "init", o_string, &initializer,
"A program to initialize the device", OPT_PRIO | OPT_PRIVFIX },
{ "connect", o_string, &connect_script,
"A program to set up a connection", OPT_PRIO | OPT_PRIVFIX },
{ "disconnect", o_string, &disconnect_script,
"Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX },
{ "welcome", o_string, &welcomer,
"Script to welcome client", OPT_PRIO | OPT_PRIVFIX },
{ "pty", o_string, &ptycommand,
"Script to run on pseudo-tty master side",
OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM },
{ "notty", o_bool, ¬ty,
"Input/output is not a tty", OPT_DEVNAM | 1 },
{ "socket", o_string, &pty_socket,
"Send and receive over socket, arg is host:port",
OPT_PRIO | OPT_DEVNAM },
{ "record", o_string, &record_file,
"Record characters sent/received to file", OPT_PRIO },
{ "crtscts", o_int, &crtscts,
"Set hardware (RTS/CTS) flow control",
OPT_PRIO | OPT_NOARG | OPT_VAL(1) },
{ "cdtrcts", o_int, &crtscts,
"Set alternate hardware (DTR/CTS) flow control",
OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) },
{ "nocrtscts", o_int, &crtscts,
"Disable hardware flow control",
OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
{ "-crtscts", o_int, &crtscts,
"Disable hardware flow control",
OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
{ "nocdtrcts", o_int, &crtscts,
"Disable hardware flow control",
OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
{ "xonxoff", o_special_noarg, (void *)setxonxoff,
"Set software (XON/XOFF) flow control", OPT_PRIOSUB },
{ "stop-bits", o_int, &stop_bits,
"Number of stop bits in serial port",
OPT_PRIO | OPT_PRIVFIX | OPT_LIMITS, NULL, 2, 1 },
{ "modem", o_bool, &modem,
"Use modem control lines", OPT_PRIO | 1 },
{ "local", o_bool, &modem,
"Don't use modem control lines", OPT_PRIOSUB | 0 },
{ "sync", o_bool, &sync_serial,
"Use synchronous HDLC serial encoding", 1 },
{ "datarate", o_int, &max_data_rate,
"Maximum data rate in bytes/sec (with pty, notty or record option)",
OPT_PRIO },
{ "escape", o_special, (void *)setescape,
"List of character codes to escape on transmission",
OPT_A2PRINTER, (void *)printescape },
{ NULL }
};
struct channel tty_channel = {
tty_options,
&tty_process_extra_options,
&tty_check_options,
&connect_tty,
&disconnect_tty,
&tty_establish_ppp,
&tty_disestablish_ppp,
&tty_do_send_config,
&tty_recv_config,
&cleanup_tty,
&tty_close_fds
};
/*
* setspeed - Set the serial port baud rate.
* If doit is 0, the call is to check whether this option is
* potentially a speed value.
*/
static int
setspeed(arg, argv, doit)
char *arg;
char **argv;
int doit;
{
char *ptr;
int spd;
spd = strtol(arg, &ptr, 0);
if (ptr == arg || *ptr != 0 || spd == 0)
return 0;
if (doit) {
inspeed = spd;
slprintf(speed_str, sizeof(speed_str), "%d", spd);
}
return 1;
}
/*
* setdevname - Set the device name.
* If doit is 0, the call is to check whether this option is
* potentially a device name.
*/
static int
setdevname(cp, argv, doit)
char *cp;
char **argv;
int doit;
{
struct stat statbuf;
char dev[MAXPATHLEN];
if (*cp == 0)
return 0;
if (*cp != '/') {
strlcpy(dev, "/dev/", sizeof(dev));
strlcat(dev, cp, sizeof(dev));
cp = dev;
}
/*
* Check if there is a character device by this name.
*/
if (stat(cp, &statbuf) < 0) {
if (!doit)
return errno != ENOENT;
option_error("Couldn't stat %s: %m", cp);
return 0;
}
if (!S_ISCHR(statbuf.st_mode)) {
if (doit)
option_error("%s is not a character device", cp);
return 0;
}
if (doit) {
strlcpy(devnam, cp, sizeof(devnam));
devstat = statbuf;
default_device = 0;
}
return 1;
}
static int
setxonxoff(argv)
char **argv;
{
lcp_wantoptions[0].asyncmap |= 0x000A0000; /* escape ^S and ^Q */
lcp_wantoptions[0].neg_asyncmap = 1;
crtscts = -2;
return 1;
}
/*
* setescape - add chars to the set we escape on transmission.
*/
static int
setescape(argv)
char **argv;
{
int n, ret;
char *p, *endp;
p = *argv;
ret = 1;
while (*p) {
n = strtol(p, &endp, 16);
if (p == endp) {
option_error("escape parameter contains invalid hex number '%s'",
p);
return 0;
}
p = endp;
if (n < 0 || n == 0x5E || n > 0xFF) {
option_error("can't escape character 0x%x", n);
ret = 0;
} else
xmit_accm[n >> 5] |= 1 << (n & 0x1F);
while (*p == ',' || *p == ' ')
++p;
}
lcp_allowoptions[0].asyncmap = xmit_accm[0];
return ret;
}
static void
printescape(opt, printer, arg)
option_t *opt;
void (*printer) __P((void *, char *, ...));
void *arg;
{
int n;
int first = 1;
for (n = 0; n < 256; ++n) {
if (n == 0x7d)
n += 2; /* skip 7d, 7e */
if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) {
if (!first)
printer(arg, ",");
else
first = 0;
printer(arg, "%x", n);
}
}
if (first)
printer(arg, "oops # nothing escaped");
}
/*
* tty_init - do various tty-related initializations.
*/
void tty_init()
{
add_notifier(&pidchange, maybe_relock, 0);
the_channel = &tty_channel;
xmit_accm[3] = 0x60000000;
}
/*
* tty_process_extra_options - work out which tty device we are using
* and read its options file.
*/
void tty_process_extra_options()
{
using_pty = notty || ptycommand != NULL || pty_socket != NULL;
if (using_pty)
return;
if (default_device) {
char *p;
if (!isatty(0) || (p = ttyname(0)) == NULL) {
option_error("no device specified and stdin is not a tty");
exit(EXIT_OPTION_ERROR);
}
strlcpy(devnam, p, sizeof(devnam));
if (stat(devnam, &devstat) < 0)
fatal("Couldn't stat default device %s: %m", devnam);
}
/*
* Parse the tty options file.
* The per-tty options file should not change
* ptycommand, pty_socket, notty or devnam.
* options_for_tty doesn't override options set on the command line,
* except for some privileged options.
*/
if (!options_for_tty())
exit(EXIT_OPTION_ERROR);
}
/*
* tty_check_options - do consistency checks on the options we were given.
*/
void
tty_check_options()
{
struct stat statbuf;
int fdflags;
if (demand && notty) {
option_error("demand-dialling is incompatible with notty");
exit(EXIT_OPTION_ERROR);
}
if (demand && connect_script == 0 && ptycommand == NULL
&& pty_socket == NULL) {
option_error("connect script is required for demand-dialling\n");
exit(EXIT_OPTION_ERROR);
}
/* default holdoff to 0 if no connect script has been given */
if (connect_script == 0 && !holdoff_specified)
holdoff = 0;
if (using_pty) {
if (!default_device) {
option_error("%s option precludes specifying device name",
pty_socket? "socket": notty? "notty": "pty");
exit(EXIT_OPTION_ERROR);
}
if (ptycommand != NULL && notty) {
option_error("pty option is incompatible with notty option");
exit(EXIT_OPTION_ERROR);
}
if (pty_socket != NULL && (ptycommand != NULL || notty)) {
option_error("socket option is incompatible with pty and notty");
exit(EXIT_OPTION_ERROR);
}
default_device = notty;
lockflag = 0;
modem = 0;
if (notty && log_to_fd <= 1)
log_to_fd = -1;
} else {
/*
* If the user has specified a device which is the same as
* the one on stdin, pretend they didn't specify any.
* If the device is already open read/write on stdin,
* we assume we don't need to lock it, and we can open it
* as root.
*/
if (fstat(0, &statbuf) >= 0 && S_ISCHR(statbuf.st_mode)
&& statbuf.st_rdev == devstat.st_rdev) {
default_device = 1;
fdflags = fcntl(0, F_GETFL);
if (fdflags != -1 && (fdflags & O_ACCMODE) == O_RDWR)
privopen = 1;
}
}
if (default_device)
nodetach = 1;
/*
* Don't send log messages to the serial port, it tends to
* confuse the peer. :-)
*/
if (log_to_fd >= 0 && fstat(log_to_fd, &statbuf) >= 0
&& S_ISCHR(statbuf.st_mode) && statbuf.st_rdev == devstat.st_rdev)
log_to_fd = -1;
}
/*
* connect_tty - get the serial port ready to start doing PPP.
* That is, open the serial port, set its speed and mode, and run
* the connector and/or welcomer.
*/
int connect_tty()
{
char *connector;
int fdflags;
#ifndef __linux__
struct stat statbuf;
#endif
char numbuf[16];
/*
* Get a pty master/slave pair if the pty, notty, socket,
* or record options were specified.
*/
strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
pty_master = -1;
pty_slave = -1;
real_ttyfd = -1;
if (using_pty || record_file != NULL) {
if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) {
error("Couldn't allocate pseudo-tty");
status = EXIT_FATAL_ERROR;
return -1;
}
set_up_tty(pty_slave, 1);
}
/*
* Lock the device if we've been asked to.
*/
status = EXIT_LOCK_FAILED;
if (lockflag && !privopen) {
if (lock(devnam) < 0)
goto errret;
locked = 1;
}
/*
* Open the serial device and set it up to be the ppp interface.
* First we open it in non-blocking mode so we can set the
* various termios flags appropriately. If we aren't dialling
* out and we want to use the modem lines, we reopen it later
* in order to wait for the carrier detect signal from the modem.
*/
got_sigterm = 0;
connector = doing_callback? callback_script: connect_script;
if (devnam[0] != 0) {
for (;;) {
/* If the user specified the device name, become the
user before opening it. */
int err, prio;
prio = privopen? OPRIO_ROOT: tty_options[0].priority;
if (prio < OPRIO_ROOT && seteuid(uid) == -1) {
error("Unable to drop privileges before opening %s: %m\n",
devnam);
status = EXIT_OPEN_FAILED;
goto errret;
}
real_ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
err = errno;
if (prio < OPRIO_ROOT && seteuid(0) == -1)
fatal("Unable to regain privileges");
if (real_ttyfd >= 0)
break;
errno = err;
if (err != EINTR) {
error("Failed to open %s: %m", devnam);
status = EXIT_OPEN_FAILED;
}
if (!persist || err != EINTR)
goto errret;
}
ttyfd = real_ttyfd;
if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
|| fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
warn("Couldn't reset non-blocking mode on device: %m");
#ifndef __linux__
/*
* Linux 2.4 and above blocks normal writes to the tty
* when it is in PPP line discipline, so this isn't needed.
*/
/*
* Do the equivalent of `mesg n' to stop broadcast messages.
*/
if (fstat(ttyfd, &statbuf) < 0
|| fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
warn("Couldn't restrict write permissions to %s: %m", devnam);
} else
tty_mode = statbuf.st_mode;
#endif /* __linux__ */
/*
* Set line speed, flow control, etc.
* If we have a non-null connection or initializer script,
* on most systems we set CLOCAL for now so that we can talk
* to the modem before carrier comes up. But this has the
* side effect that we might miss it if CD drops before we
* get to clear CLOCAL below. On systems where we can talk
* successfully to the modem with CLOCAL clear and CD down,
* we could clear CLOCAL at this point.
*/
set_up_tty(ttyfd, ((connector != NULL && connector[0] != 0)
|| initializer != NULL));
}
/*
* If the pty, socket, notty and/or record option was specified,
* start up the character shunt now.
*/
status = EXIT_PTYCMD_FAILED;
if (ptycommand != NULL) {
if (record_file != NULL) {
int ipipe[2], opipe[2], ok;
if (pipe(ipipe) < 0 || pipe(opipe) < 0)
fatal("Couldn't create pipes for record option: %m");
/* don't leak these to the ptycommand */
(void) fcntl(ipipe[0], F_SETFD, FD_CLOEXEC);
(void) fcntl(opipe[1], F_SETFD, FD_CLOEXEC);
ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
&& start_charshunt(ipipe[0], opipe[1]);
close(ipipe[0]);
close(ipipe[1]);
close(opipe[0]);
close(opipe[1]);
if (!ok)
goto errret;
} else {
if (device_script(ptycommand, pty_master, pty_master, 1) < 0)
goto errret;
}
} else if (pty_socket != NULL) {
int fd = open_socket(pty_socket);
if (fd < 0)
goto errret;
if (!start_charshunt(fd, fd))
goto errret;
close(fd);
} else if (notty) {
if (!start_charshunt(0, 1))
goto errret;
dup2(fd_devnull, 0);
dup2(fd_devnull, 1);
if (log_to_fd == 1)
log_to_fd = -1;
if (log_to_fd != 2)
dup2(fd_devnull, 2);
} else if (record_file != NULL) {
int fd = dup(ttyfd);
if (!start_charshunt(fd, fd))
goto errret;
}
if (using_pty || record_file != NULL) {
ttyfd = pty_slave;
close(pty_master);
pty_master = -1;
}
/* run connection script */
if ((connector && connector[0]) || initializer) {
if (real_ttyfd != -1) {
/* XXX do this if doing_callback == CALLBACK_DIALIN? */
if (!default_device && modem) {
setdtr(real_ttyfd, 0); /* in case modem is off hook */
sleep(1);
setdtr(real_ttyfd, 1);
}
}
if (initializer && initializer[0]) {
if (device_script(initializer, ttyfd, ttyfd, 0) < 0) {
error("Initializer script failed");
status = EXIT_INIT_FAILED;
goto errretf;
}
if (got_sigterm) {
disconnect_tty();
goto errretf;
}
info("Serial port initialized.");
}
if (connector && connector[0]) {
if (device_script(connector, ttyfd, ttyfd, 0) < 0) {
error("Connect script failed");
status = EXIT_CONNECT_FAILED;
goto errretf;
}
if (got_sigterm) {
disconnect_tty();
goto errretf;
}
info("Serial connection established.");
}
/* set line speed, flow control, etc.;
clear CLOCAL if modem option */
if (real_ttyfd != -1)
set_up_tty(real_ttyfd, 0);
if (doing_callback == CALLBACK_DIALIN)
connector = NULL;
}
/* reopen tty if necessary to wait for carrier */
if (connector == NULL && modem && devnam[0] != 0) {
int i;
for (;;) {
if ((i = open(devnam, O_RDWR)) >= 0)
break;
if (errno != EINTR) {
error("Failed to reopen %s: %m", devnam);
status = EXIT_OPEN_FAILED;
}
if (!persist || errno != EINTR || hungup || got_sigterm)
goto errret;
}
close(i);
}
slprintf(numbuf, sizeof(numbuf), "%d", baud_rate);
script_setenv("SPEED", numbuf, 0);
/* run welcome script, if any */
if (welcomer && welcomer[0]) {
if (device_script(welcomer, ttyfd, ttyfd, 0) < 0)
warn("Welcome script failed");
}
/*
* If we are initiating this connection, wait for a short
* time for something from the peer. This can avoid bouncing
* our packets off his tty before he has it set up.
*/
if (connector != NULL || ptycommand != NULL || pty_socket != NULL)
listen_time = connect_delay;
return ttyfd;
errretf:
if (real_ttyfd >= 0)
tcflush(real_ttyfd, TCIOFLUSH);
errret:
if (pty_master >= 0) {
close(pty_master);
pty_master = -1;
}
ttyfd = -1;
if (got_sigterm)
asked_to_quit = 1;
return -1;
}
void disconnect_tty()
{
if (disconnect_script == NULL || hungup)
return;
if (real_ttyfd >= 0)
set_up_tty(real_ttyfd, 1);
if (device_script(disconnect_script, ttyfd, ttyfd, 0) < 0) {
warn("disconnect script failed");
} else {
info("Serial link disconnected.");
}
stop_charshunt(NULL, 0);
}
void tty_close_fds()
{
if (pty_slave >= 0)
close(pty_slave);
if (real_ttyfd >= 0) {
close(real_ttyfd);
real_ttyfd = -1;
}
/* N.B. ttyfd will == either pty_slave or real_ttyfd */
}
void cleanup_tty()
{
if (real_ttyfd >= 0)
finish_tty();
tty_close_fds();
if (locked) {
unlock();
locked = 0;
}
}
/*
* tty_do_send_config - set transmit-side PPP configuration.
* We set the extended transmit ACCM here as well.
*/
void
tty_do_send_config(mtu, accm, pcomp, accomp)
int mtu;
u_int32_t accm;
int pcomp, accomp;
{
tty_set_xaccm(xmit_accm);
tty_send_config(mtu, accm, pcomp, accomp);
}
/*
* finish_tty - restore the terminal device to its original settings
*/
static void
finish_tty()
{
/* drop dtr to hang up */
if (!default_device && modem) {
setdtr(real_ttyfd, 0);
/*
* This sleep is in case the serial port has CLOCAL set by default,
* and consequently will reassert DTR when we close the device.
*/
sleep(1);
}
restore_tty(real_ttyfd);
#ifndef __linux__
if (tty_mode != (mode_t) -1) {
if (fchmod(real_ttyfd, tty_mode) != 0)
error("Couldn't restore tty permissions");
}
#endif /* __linux__ */
close(real_ttyfd);
real_ttyfd = -1;
}
/*
* maybe_relock - our PID has changed, maybe update the lock file.
*/
static void
maybe_relock(arg, pid)
void *arg;
int pid;
{
if (locked)
relock(pid);
}
/*
* open_socket - establish a stream socket connection to the nominated
* host and port.
*/
static int
open_socket(dest)
char *dest;
{
char *sep, *endp = NULL;
int sock, port = -1;
u_int32_t host;
struct hostent *hent;
struct sockaddr_in sad;
/* parse host:port and resolve host to an IP address */
sep = strchr(dest, ':');
if (sep != NULL)
port = strtol(sep+1, &endp, 10);
if (port < 0 || endp == sep+1 || sep == dest) {
error("Can't parse host:port for socket destination");
return -1;
}
*sep = 0;
host = inet_addr(dest);
if (host == (u_int32_t) -1) {
hent = gethostbyname(dest);
if (hent == NULL) {
error("%s: unknown host in socket option", dest);
*sep = ':';
return -1;
}
host = *(u_int32_t *)(hent->h_addr_list[0]);
}
*sep = ':';
/* get a socket and connect it to the other end */
sock = socket(PF_INET, SOCK_STREAM, 0);
if (sock < 0) {
error("Can't create socket: %m");
return -1;
}
memset(&sad, 0, sizeof(sad));
sad.sin_family = AF_INET;
sad.sin_port = htons(port);
sad.sin_addr.s_addr = host;
if (connect(sock, (struct sockaddr *)&sad, sizeof(sad)) < 0) {
error("Can't connect to %s: %m", dest);
close(sock);
return -1;
}
return sock;
}
/*
* start_charshunt - create a child process to run the character shunt.
*/
static int
start_charshunt(ifd, ofd)
int ifd, ofd;
{
int cpid;
cpid = safe_fork(ifd, ofd, (log_to_fd >= 0? log_to_fd: 2));
if (cpid == -1) {
error("Can't fork process for character shunt: %m");
return 0;
}
if (cpid == 0) {
/* child */
reopen_log();
if (!nodetach)
log_to_fd = -1;
else if (log_to_fd >= 0)
log_to_fd = 2;
setgid(getgid());
setuid(uid);
if (getuid() != uid)
fatal("setuid failed");
charshunt(0, 1, record_file);
exit(0);
}
charshunt_pid = cpid;
record_child(cpid, "pppd (charshunt)", charshunt_done, NULL, 1);
return 1;
}
static void
charshunt_done(arg)
void *arg;
{
charshunt_pid = 0;
}
static void
stop_charshunt(arg, sig)
void *arg;
int sig;
{
if (charshunt_pid)
kill(charshunt_pid, (sig == SIGINT? sig: SIGTERM));
}
/*
* charshunt - the character shunt, which passes characters between
* the pty master side and the serial port (or stdin/stdout).
* This runs as the user (not as root).
* (We assume ofd >= ifd which is true the way this gets called. :-).
*/
static void
charshunt(ifd, ofd, record_file)
int ifd, ofd;
char *record_file;
{
int n, nfds;
fd_set ready, writey;
u_char *ibufp, *obufp;
int nibuf, nobuf;
int flags;
int pty_readable, stdin_readable;
struct timeval lasttime;
FILE *recordf = NULL;
int ilevel, olevel, max_level;
struct timeval levelt, tout, *top;
extern u_char inpacket_buf[];
/*
* Reset signal handlers.
*/
signal(SIGHUP, SIG_IGN); /* Hangup */
signal(SIGINT, SIG_DFL); /* Interrupt */
signal(SIGTERM, SIG_DFL); /* Terminate */
signal(SIGCHLD, SIG_DFL);
signal(SIGUSR1, SIG_DFL);
signal(SIGUSR2, SIG_DFL);
signal(SIGABRT, SIG_DFL);
signal(SIGALRM, SIG_DFL);
signal(SIGFPE, SIG_DFL);
signal(SIGILL, SIG_DFL);
signal(SIGPIPE, SIG_DFL);
signal(SIGQUIT, SIG_DFL);
signal(SIGSEGV, SIG_DFL);
#ifdef SIGBUS
signal(SIGBUS, SIG_DFL);
#endif
#ifdef SIGEMT
signal(SIGEMT, SIG_DFL);
#endif
#ifdef SIGPOLL
signal(SIGPOLL, SIG_DFL);
#endif
#ifdef SIGPROF
signal(SIGPROF, SIG_DFL);
#endif
#ifdef SIGSYS
signal(SIGSYS, SIG_DFL);
#endif
#ifdef SIGTRAP
signal(SIGTRAP, SIG_DFL);
#endif
#ifdef SIGVTALRM
signal(SIGVTALRM, SIG_DFL);
#endif
#ifdef SIGXCPU
signal(SIGXCPU, SIG_DFL);
#endif
#ifdef SIGXFSZ
signal(SIGXFSZ, SIG_DFL);
#endif
/*
* Check that the fds won't overrun the fd_sets
*/
if (ifd >= FD_SETSIZE || ofd >= FD_SETSIZE || pty_master >= FD_SETSIZE)
fatal("internal error: file descriptor too large (%d, %d, %d)",
ifd, ofd, pty_master);
/*
* Open the record file if required.
*/
if (record_file != NULL) {
recordf = fopen(record_file, "a");
if (recordf == NULL)
error("Couldn't create record file %s: %m", record_file);
}
/* set all the fds to non-blocking mode */
flags = fcntl(pty_master, F_GETFL);
if (flags == -1
|| fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1)
warn("couldn't set pty master to nonblock: %m");
flags = fcntl(ifd, F_GETFL);
if (flags == -1
|| fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1)
warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty"));
if (ofd != ifd) {
flags = fcntl(ofd, F_GETFL);
if (flags == -1
|| fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1)
warn("couldn't set stdout to nonblock: %m");
}
nibuf = nobuf = 0;
ibufp = obufp = NULL;
pty_readable = stdin_readable = 1;
ilevel = olevel = 0;
gettimeofday(&levelt, NULL);
if (max_data_rate) {
max_level = max_data_rate / 10;
if (max_level < 100)
max_level = 100;
} else
max_level = PPP_MRU + PPP_HDRLEN + 1;
nfds = (ofd > pty_master? ofd: pty_master) + 1;
if (recordf != NULL) {
gettimeofday(&lasttime, NULL);
putc(7, recordf); /* put start marker */
putc(lasttime.tv_sec >> 24, recordf);
putc(lasttime.tv_sec >> 16, recordf);
putc(lasttime.tv_sec >> 8, recordf);
putc(lasttime.tv_sec, recordf);
lasttime.tv_usec = 0;
}
while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) {
top = 0;
tout.tv_sec = 0;
tout.tv_usec = 10000;
FD_ZERO(&ready);
FD_ZERO(&writey);
if (nibuf != 0) {
if (ilevel >= max_level)
top = &tout;
else
FD_SET(pty_master, &writey);
} else if (stdin_readable)
FD_SET(ifd, &ready);
if (nobuf != 0) {
if (olevel >= max_level)
top = &tout;
else
FD_SET(ofd, &writey);
} else if (pty_readable)
FD_SET(pty_master, &ready);
if (select(nfds, &ready, &writey, NULL, top) < 0) {
if (errno != EINTR)
fatal("select");
continue;
}
if (max_data_rate) {
double dt;
int nbt;
struct timeval now;
gettimeofday(&now, NULL);
dt = (now.tv_sec - levelt.tv_sec
+ (now.tv_usec - levelt.tv_usec) / 1e6);
nbt = (int)(dt * max_data_rate);
ilevel = (nbt < 0 || nbt > ilevel)? 0: ilevel - nbt;
olevel = (nbt < 0 || nbt > olevel)? 0: olevel - nbt;
levelt = now;
} else
ilevel = olevel = 0;
if (FD_ISSET(ifd, &ready)) {
ibufp = inpacket_buf;
nibuf = read(ifd, ibufp, PPP_MRU + PPP_HDRLEN);
if (nibuf < 0 && errno == EIO)
nibuf = 0;
if (nibuf < 0) {
if (!(errno == EINTR || errno == EAGAIN)) {
error("Error reading standard input: %m");
break;
}
nibuf = 0;
} else if (nibuf == 0) {
/* end of file from stdin */
stdin_readable = 0;
if (recordf)
if (!record_write(recordf, 4, NULL, 0, &lasttime))
recordf = NULL;
} else {
FD_SET(pty_master, &writey);
if (recordf)
if (!record_write(recordf, 2, ibufp, nibuf, &lasttime))
recordf = NULL;
}
}
if (FD_ISSET(pty_master, &ready)) {
obufp = outpacket_buf;
nobuf = read(pty_master, obufp, PPP_MRU + PPP_HDRLEN);
if (nobuf < 0 && errno == EIO)
nobuf = 0;
if (nobuf < 0) {
if (!(errno == EINTR || errno == EAGAIN)) {
error("Error reading pseudo-tty master: %m");
break;
}
nobuf = 0;
} else if (nobuf == 0) {
/* end of file from the pty - slave side has closed */
pty_readable = 0;
stdin_readable = 0; /* pty is not writable now */
nibuf = 0;
close(ofd);
if (recordf)
if (!record_write(recordf, 3, NULL, 0, &lasttime))
recordf = NULL;
} else {
FD_SET(ofd, &writey);
if (recordf)
if (!record_write(recordf, 1, obufp, nobuf, &lasttime))
recordf = NULL;
}
} else if (!stdin_readable)
pty_readable = 0;
if (FD_ISSET(ofd, &writey)) {
n = nobuf;
if (olevel + n > max_level)
n = max_level - olevel;
n = write(ofd, obufp, n);
if (n < 0) {
if (errno == EIO) {
pty_readable = 0;
nobuf = 0;
} else if (errno != EAGAIN && errno != EINTR) {
error("Error writing standard output: %m");
break;
}
} else {
obufp += n;
nobuf -= n;
olevel += n;
}
}
if (FD_ISSET(pty_master, &writey)) {
n = nibuf;
if (ilevel + n > max_level)
n = max_level - ilevel;
n = write(pty_master, ibufp, n);
if (n < 0) {
if (errno == EIO) {
stdin_readable = 0;
nibuf = 0;
} else if (errno != EAGAIN && errno != EINTR) {
error("Error writing pseudo-tty master: %m");
break;
}
} else {
ibufp += n;
nibuf -= n;
ilevel += n;
}
}
}
exit(0);
}
static int
record_write(f, code, buf, nb, tp)
FILE *f;
int code;
u_char *buf;
int nb;
struct timeval *tp;
{
struct timeval now;
int diff;
gettimeofday(&now, NULL);
now.tv_usec /= 100000; /* actually 1/10 s, not usec now */
diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec);
if (diff > 0) {
if (diff > 255) {
putc(5, f);
putc(diff >> 24, f);
putc(diff >> 16, f);
putc(diff >> 8, f);
putc(diff, f);
} else {
putc(6, f);
putc(diff, f);
}
*tp = now;
}
putc(code, f);
if (buf != NULL) {
putc(nb >> 8, f);
putc(nb, f);
fwrite(buf, nb, 1, f);
}
fflush(f);
if (ferror(f)) {
error("Error writing record file: %m");
return 0;
}
return 1;
}