C++程序  |  122行  |  4.07 KB

/*
 * mppe.h - Definitions for MPPE
 *
 * Copyright (c) 2008 Paul Mackerras. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. The name(s) of the authors of this software must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission.
 *
 * 4. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by Paul Mackerras
 *     <paulus@samba.org>".
 *
 * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO
 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY
 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
 * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
 * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#define MPPE_PAD		4	/* MPPE growth per frame */
#define MPPE_MAX_KEY_LEN	16	/* largest key length (128-bit) */

/* option bits for ccp_options.mppe */
#define MPPE_OPT_40		0x01	/* 40 bit */
#define MPPE_OPT_128		0x02	/* 128 bit */
#define MPPE_OPT_STATEFUL	0x04	/* stateful mode */
/* unsupported opts */
#define MPPE_OPT_56		0x08	/* 56 bit */
#define MPPE_OPT_MPPC		0x10	/* MPPC compression */
#define MPPE_OPT_D		0x20	/* Unknown */
#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)
#define MPPE_OPT_UNKNOWN	0x40	/* Bits !defined in RFC 3078 were set */

/*
 * This is not nice ... the alternative is a bitfield struct though.
 * And unfortunately, we cannot share the same bits for the option
 * names above since C and H are the same bit.  We could do a u_int32
 * but then we have to do a htonl() all the time and/or we still need
 * to know which octet is which.
 */
#define MPPE_C_BIT		0x01	/* MPPC */
#define MPPE_D_BIT		0x10	/* Obsolete, usage unknown */
#define MPPE_L_BIT		0x20	/* 40-bit */
#define MPPE_S_BIT		0x40	/* 128-bit */
#define MPPE_M_BIT		0x80	/* 56-bit, not supported */
#define MPPE_H_BIT		0x01	/* Stateless (in a different byte) */

/* Does not include H bit; used for least significant octet only. */
#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)

/* Build a CI from mppe opts (see RFC 3078) */
#define MPPE_OPTS_TO_CI(opts, ci)		\
    do {					\
	u_char *ptr = ci; /* u_char[4] */	\
						\
	/* H bit */				\
	if (opts & MPPE_OPT_STATEFUL)		\
	    *ptr++ = 0x0;			\
	else					\
	    *ptr++ = MPPE_H_BIT;		\
	*ptr++ = 0;				\
	*ptr++ = 0;				\
						\
	/* S,L bits */				\
	*ptr = 0;				\
	if (opts & MPPE_OPT_128)		\
	    *ptr |= MPPE_S_BIT;			\
	if (opts & MPPE_OPT_40)			\
	    *ptr |= MPPE_L_BIT;			\
	/* M,D,C bits not supported */		\
    } while (/* CONSTCOND */ 0)

/* The reverse of the above */
#define MPPE_CI_TO_OPTS(ci, opts)		\
    do {					\
	u_char *ptr = ci; /* u_char[4] */	\
						\
	opts = 0;				\
						\
	/* H bit */				\
	if (!(ptr[0] & MPPE_H_BIT))		\
	    opts |= MPPE_OPT_STATEFUL;		\
						\
	/* S,L bits */				\
	if (ptr[3] & MPPE_S_BIT)		\
	    opts |= MPPE_OPT_128;		\
	if (ptr[3] & MPPE_L_BIT)		\
	    opts |= MPPE_OPT_40;		\
						\
	/* M,D,C bits */			\
	if (ptr[3] & MPPE_M_BIT)		\
	    opts |= MPPE_OPT_56;		\
	if (ptr[3] & MPPE_D_BIT)		\
	    opts |= MPPE_OPT_D;			\
	if (ptr[3] & MPPE_C_BIT)		\
	    opts |= MPPE_OPT_MPPC;		\
						\
	/* Other bits */			\
	if (ptr[0] & ~MPPE_H_BIT)		\
	    opts |= MPPE_OPT_UNKNOWN;		\
	if (ptr[1] || ptr[2])			\
	    opts |= MPPE_OPT_UNKNOWN;		\
	if (ptr[3] & ~MPPE_ALL_BITS)		\
	    opts |= MPPE_OPT_UNKNOWN;		\
    } while (/* CONSTCOND */ 0)