/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* Dalvik classfile verification. This file contains the verifier entry
* points and the static constraint checks.
*/
#include "Dalvik.h"
#include "analysis/CodeVerify.h"
#include "libdex/DexCatch.h"
/* fwd */
static bool verifyMethod(Method* meth);
static bool verifyInstructions(VerifierData* vdata);
/*
* Verify a class.
*
* By the time we get here, the value of gDvm.classVerifyMode should already
* have been factored in. If you want to call into the verifier even
* though verification is disabled, that's your business.
*
* Returns "true" on success.
*/
bool dvmVerifyClass(ClassObject* clazz)
{
int i;
if (dvmIsClassVerified(clazz)) {
LOGD("Ignoring duplicate verify attempt on %s", clazz->descriptor);
return true;
}
for (i = 0; i < clazz->directMethodCount; i++) {
if (!verifyMethod(&clazz->directMethods[i])) {
LOG_VFY("Verifier rejected class %s", clazz->descriptor);
return false;
}
}
for (i = 0; i < clazz->virtualMethodCount; i++) {
if (!verifyMethod(&clazz->virtualMethods[i])) {
LOG_VFY("Verifier rejected class %s", clazz->descriptor);
return false;
}
}
return true;
}
/*
* Compute the width of the instruction at each address in the instruction
* stream, and store it in vdata->insnFlags. Addresses that are in the
* middle of an instruction, or that are part of switch table data, are not
* touched (so the caller should probably initialize "insnFlags" to zero).
*
* The "newInstanceCount" and "monitorEnterCount" fields in vdata are
* also set.
*
* Performs some static checks, notably:
* - opcode of first instruction begins at index 0
* - only documented instructions may appear
* - each instruction follows the last
* - last byte of last instruction is at (code_length-1)
*
* Logs an error and returns "false" on failure.
*/
static bool computeWidthsAndCountOps(VerifierData* vdata)
{
const Method* meth = vdata->method;
InsnFlags* insnFlags = vdata->insnFlags;
size_t insnCount = vdata->insnsSize;
const u2* insns = meth->insns;
bool result = false;
int newInstanceCount = 0;
int monitorEnterCount = 0;
int i;
for (i = 0; i < (int) insnCount; /**/) {
size_t width = dexGetWidthFromInstruction(insns);
if (width == 0) {
LOG_VFY_METH(meth, "VFY: invalid instruction (0x%04x)", *insns);
goto bail;
} else if (width > 65535) {
LOG_VFY_METH(meth,
"VFY: warning: unusually large instr width (%d)", width);
}
Opcode opcode = dexOpcodeFromCodeUnit(*insns);
if (opcode == OP_NEW_INSTANCE || opcode == OP_NEW_INSTANCE_JUMBO)
newInstanceCount++;
if (opcode == OP_MONITOR_ENTER)
monitorEnterCount++;
insnFlags[i] |= width;
i += width;
insns += width;
}
if (i != (int) vdata->insnsSize) {
LOG_VFY_METH(meth, "VFY: code did not end where expected (%d vs. %d)",
i, dvmGetMethodInsnsSize(meth));
goto bail;
}
result = true;
vdata->newInstanceCount = newInstanceCount;
vdata->monitorEnterCount = monitorEnterCount;
bail:
return result;
}
/*
* Set the "in try" flags for all instructions protected by "try" statements.
* Also sets the "branch target" flags for exception handlers.
*
* Call this after widths have been set in "insnFlags".
*
* Returns "false" if something in the exception table looks fishy, but
* we're expecting the exception table to be somewhat sane.
*/
static bool scanTryCatchBlocks(const Method* meth, InsnFlags* insnFlags)
{
u4 insnsSize = dvmGetMethodInsnsSize(meth);
const DexCode* pCode = dvmGetMethodCode(meth);
u4 triesSize = pCode->triesSize;
const DexTry* pTries;
u4 idx;
if (triesSize == 0) {
return true;
}
pTries = dexGetTries(pCode);
for (idx = 0; idx < triesSize; idx++) {
const DexTry* pTry = &pTries[idx];
u4 start = pTry->startAddr;
u4 end = start + pTry->insnCount;
u4 addr;
if ((start >= end) || (start >= insnsSize) || (end > insnsSize)) {
LOG_VFY_METH(meth,
"VFY: bad exception entry: startAddr=%d endAddr=%d (size=%d)",
start, end, insnsSize);
return false;
}
if (dvmInsnGetWidth(insnFlags, start) == 0) {
LOG_VFY_METH(meth,
"VFY: 'try' block starts inside an instruction (%d)",
start);
return false;
}
for (addr = start; addr < end;
addr += dvmInsnGetWidth(insnFlags, addr))
{
assert(dvmInsnGetWidth(insnFlags, addr) != 0);
dvmInsnSetInTry(insnFlags, addr, true);
}
}
/* Iterate over each of the handlers to verify target addresses. */
u4 handlersSize = dexGetHandlersSize(pCode);
u4 offset = dexGetFirstHandlerOffset(pCode);
for (idx = 0; idx < handlersSize; idx++) {
DexCatchIterator iterator;
dexCatchIteratorInit(&iterator, pCode, offset);
for (;;) {
DexCatchHandler* handler = dexCatchIteratorNext(&iterator);
u4 addr;
if (handler == NULL) {
break;
}
addr = handler->address;
if (dvmInsnGetWidth(insnFlags, addr) == 0) {
LOG_VFY_METH(meth,
"VFY: exception handler starts at bad address (%d)",
addr);
return false;
}
dvmInsnSetBranchTarget(insnFlags, addr, true);
}
offset = dexCatchIteratorGetEndOffset(&iterator, pCode);
}
return true;
}
/*
* Perform verification on a single method.
*
* We do this in three passes:
* (1) Walk through all code units, determining instruction locations,
* widths, and other characteristics.
* (2) Walk through all code units, performing static checks on
* operands.
* (3) Iterate through the method, checking type safety and looking
* for code flow problems.
*
* Some checks may be bypassed depending on the verification mode. We can't
* turn this stuff off completely if we want to do "exact" GC.
*
* TODO: cite source?
* Confirmed here:
* - code array must not be empty
* - (N/A) code_length must be less than 65536
* Confirmed by computeWidthsAndCountOps():
* - opcode of first instruction begins at index 0
* - only documented instructions may appear
* - each instruction follows the last
* - last byte of last instruction is at (code_length-1)
*/
static bool verifyMethod(Method* meth)
{
bool result = false;
/*
* Verifier state blob. Various values will be cached here so we
* can avoid expensive lookups and pass fewer arguments around.
*/
VerifierData vdata;
#if 1 // ndef NDEBUG
memset(&vdata, 0x99, sizeof(vdata));
#endif
vdata.method = meth;
vdata.insnsSize = dvmGetMethodInsnsSize(meth);
vdata.insnRegCount = meth->registersSize;
vdata.insnFlags = NULL;
vdata.uninitMap = NULL;
vdata.basicBlocks = NULL;
/*
* If there aren't any instructions, make sure that's expected, then
* exit successfully. Note: for native methods, meth->insns gets set
* to a native function pointer on first call, so don't use that as
* an indicator.
*/
if (vdata.insnsSize == 0) {
if (!dvmIsNativeMethod(meth) && !dvmIsAbstractMethod(meth)) {
LOG_VFY_METH(meth,
"VFY: zero-length code in concrete non-native method");
goto bail;
}
goto success;
}
/*
* Sanity-check the register counts. ins + locals = registers, so make
* sure that ins <= registers.
*/
if (meth->insSize > meth->registersSize) {
LOG_VFY_METH(meth, "VFY: bad register counts (ins=%d regs=%d)",
meth->insSize, meth->registersSize);
goto bail;
}
/*
* Allocate and populate an array to hold instruction data.
*
* TODO: Consider keeping a reusable pre-allocated array sitting
* around for smaller methods.
*/
vdata.insnFlags = (InsnFlags*) calloc(vdata.insnsSize, sizeof(InsnFlags));
if (vdata.insnFlags == NULL)
goto bail;
/*
* Compute the width of each instruction and store the result in insnFlags.
* Count up the #of occurrences of certain opcodes while we're at it.
*/
if (!computeWidthsAndCountOps(&vdata))
goto bail;
/*
* Allocate a map to hold the classes of uninitialized instances.
*/
vdata.uninitMap = dvmCreateUninitInstanceMap(meth, vdata.insnFlags,
vdata.newInstanceCount);
if (vdata.uninitMap == NULL)
goto bail;
/*
* Set the "in try" flags for all instructions guarded by a "try" block.
* Also sets the "branch target" flag on exception handlers.
*/
if (!scanTryCatchBlocks(meth, vdata.insnFlags))
goto bail;
/*
* Perform static instruction verification. Also sets the "branch
* target" flags.
*/
if (!verifyInstructions(&vdata))
goto bail;
/*
* Do code-flow analysis.
*
* We could probably skip this for a method with no registers, but
* that's so rare that there's little point in checking.
*/
if (!dvmVerifyCodeFlow(&vdata)) {
//LOGD("+++ %s failed code flow", meth->name);
goto bail;
}
success:
result = true;
bail:
dvmFreeVfyBasicBlocks(&vdata);
dvmFreeUninitInstanceMap(vdata.uninitMap);
free(vdata.insnFlags);
return result;
}
/*
* Verify an array data table. "curOffset" is the offset of the
* fill-array-data instruction.
*/
static bool checkArrayData(const Method* meth, u4 curOffset)
{
const u4 insnCount = dvmGetMethodInsnsSize(meth);
const u2* insns = meth->insns + curOffset;
const u2* arrayData;
u4 valueCount, valueWidth, tableSize;
s4 offsetToArrayData;
assert(curOffset < insnCount);
/* make sure the start of the array data table is in range */
offsetToArrayData = insns[1] | (((s4)insns[2]) << 16);
if ((s4)curOffset + offsetToArrayData < 0 ||
curOffset + offsetToArrayData + 2 >= insnCount)
{
LOG_VFY("VFY: invalid array data start: at %d, data offset %d, "
"count %d",
curOffset, offsetToArrayData, insnCount);
return false;
}
/* offset to array data table is a relative branch-style offset */
arrayData = insns + offsetToArrayData;
/* make sure the table is 32-bit aligned */
if ((((u4) arrayData) & 0x03) != 0) {
LOG_VFY("VFY: unaligned array data table: at %d, data offset %d",
curOffset, offsetToArrayData);
return false;
}
valueWidth = arrayData[1];
valueCount = *(u4*)(&arrayData[2]);
tableSize = 4 + (valueWidth * valueCount + 1) / 2;
/* make sure the end of the switch is in range */
if (curOffset + offsetToArrayData + tableSize > insnCount) {
LOG_VFY("VFY: invalid array data end: at %d, data offset %d, end %d, "
"count %d",
curOffset, offsetToArrayData,
curOffset + offsetToArrayData + tableSize, insnCount);
return false;
}
return true;
}
/*
* Perform static checks on a "new-instance" instruction. Specifically,
* make sure the class reference isn't for an array class.
*
* We don't need the actual class, just a pointer to the class name.
*/
static bool checkNewInstance(const DvmDex* pDvmDex, u4 idx)
{
const char* classDescriptor;
if (idx >= pDvmDex->pHeader->typeIdsSize) {
LOG_VFY("VFY: bad type index %d (max %d)",
idx, pDvmDex->pHeader->typeIdsSize);
return false;
}
classDescriptor = dexStringByTypeIdx(pDvmDex->pDexFile, idx);
if (classDescriptor[0] != 'L') {
LOG_VFY("VFY: can't call new-instance on type '%s'",
classDescriptor);
return false;
}
return true;
}
/*
* Perform static checks on a "new-array" instruction. Specifically, make
* sure they aren't creating an array of arrays that causes the number of
* dimensions to exceed 255.
*/
static bool checkNewArray(const DvmDex* pDvmDex, u4 idx)
{
const char* classDescriptor;
if (idx >= pDvmDex->pHeader->typeIdsSize) {
LOG_VFY("VFY: bad type index %d (max %d)",
idx, pDvmDex->pHeader->typeIdsSize);
return false;
}
classDescriptor = dexStringByTypeIdx(pDvmDex->pDexFile, idx);
int bracketCount = 0;
const char* cp = classDescriptor;
while (*cp++ == '[')
bracketCount++;
if (bracketCount == 0) {
/* The given class must be an array type. */
LOG_VFY("VFY: can't new-array class '%s' (not an array)",
classDescriptor);
return false;
} else if (bracketCount > 255) {
/* It is illegal to create an array of more than 255 dimensions. */
LOG_VFY("VFY: can't new-array class '%s' (exceeds limit)",
classDescriptor);
return false;
}
return true;
}
/*
* Perform static checks on an instruction that takes a class constant.
* Ensure that the class index is in the valid range.
*/
static bool checkTypeIndex(const DvmDex* pDvmDex, u4 idx)
{
if (idx >= pDvmDex->pHeader->typeIdsSize) {
LOG_VFY("VFY: bad type index %d (max %d)",
idx, pDvmDex->pHeader->typeIdsSize);
return false;
}
return true;
}
/*
* Perform static checks on a field get or set instruction. All we do
* here is ensure that the field index is in the valid range.
*/
static bool checkFieldIndex(const DvmDex* pDvmDex, u4 idx)
{
if (idx >= pDvmDex->pHeader->fieldIdsSize) {
LOG_VFY("VFY: bad field index %d (max %d)",
idx, pDvmDex->pHeader->fieldIdsSize);
return false;
}
return true;
}
/*
* Perform static checks on a method invocation instruction. All we do
* here is ensure that the method index is in the valid range.
*/
static bool checkMethodIndex(const DvmDex* pDvmDex, u4 idx)
{
if (idx >= pDvmDex->pHeader->methodIdsSize) {
LOG_VFY("VFY: bad method index %d (max %d)",
idx, pDvmDex->pHeader->methodIdsSize);
return false;
}
return true;
}
/*
* Ensure that the string index is in the valid range.
*/
static bool checkStringIndex(const DvmDex* pDvmDex, u4 idx)
{
if (idx >= pDvmDex->pHeader->stringIdsSize) {
LOG_VFY("VFY: bad string index %d (max %d)",
idx, pDvmDex->pHeader->stringIdsSize);
return false;
}
return true;
}
/*
* Ensure that the register index is valid for this method.
*/
static bool checkRegisterIndex(const Method* meth, u4 idx)
{
if (idx >= meth->registersSize) {
LOG_VFY("VFY: register index out of range (%d >= %d)",
idx, meth->registersSize);
return false;
}
return true;
}
/*
* Ensure that the wide register index is valid for this method.
*/
static bool checkWideRegisterIndex(const Method* meth, u4 idx)
{
if (idx+1 >= meth->registersSize) {
LOG_VFY("VFY: wide register index out of range (%d+1 >= %d)",
idx, meth->registersSize);
return false;
}
return true;
}
/*
* Check the register indices used in a "vararg" instruction, such as
* invoke-virtual or filled-new-array.
*
* vA holds word count (0-5), args[] have values.
*
* There are some tests we don't do here, e.g. we don't try to verify
* that invoking a method that takes a double is done with consecutive
* registers. This requires parsing the target method signature, which
* we will be doing later on during the code flow analysis.
*/
static bool checkVarargRegs(const Method* meth,
const DecodedInstruction* pDecInsn)
{
u2 registersSize = meth->registersSize;
unsigned int idx;
if (pDecInsn->vA > 5) {
LOG_VFY("VFY: invalid arg count (%d) in non-range invoke)",
pDecInsn->vA);
return false;
}
for (idx = 0; idx < pDecInsn->vA; idx++) {
if (pDecInsn->arg[idx] > registersSize) {
LOG_VFY("VFY: invalid reg index (%d) in non-range invoke (> %d)",
pDecInsn->arg[idx], registersSize);
return false;
}
}
return true;
}
/*
* Check the register indices used in a "vararg/range" instruction, such as
* invoke-virtual/range or filled-new-array/range.
*
* vA holds word count, vC holds index of first reg.
*/
static bool checkVarargRangeRegs(const Method* meth,
const DecodedInstruction* pDecInsn)
{
u2 registersSize = meth->registersSize;
/*
* vA/vC are unsigned 8-bit/16-bit quantities for /range instructions,
* so there's no risk of integer overflow when adding them here.
*/
if (pDecInsn->vA + pDecInsn->vC > registersSize) {
LOG_VFY("VFY: invalid reg index %d+%d in range invoke (> %d)",
pDecInsn->vA, pDecInsn->vC, registersSize);
return false;
}
return true;
}
/*
* Verify a switch table. "curOffset" is the offset of the switch
* instruction.
*
* Updates "insnFlags", setting the "branch target" flag.
*/
static bool checkSwitchTargets(const Method* meth, InsnFlags* insnFlags,
u4 curOffset)
{
const u4 insnCount = dvmGetMethodInsnsSize(meth);
const u2* insns = meth->insns + curOffset;
const u2* switchInsns;
u2 expectedSignature;
u4 switchCount, tableSize;
s4 offsetToSwitch, offsetToKeys, offsetToTargets;
s4 offset, absOffset;
u4 targ;
assert(curOffset < insnCount);
/* make sure the start of the switch is in range */
offsetToSwitch = insns[1] | ((s4) insns[2]) << 16;
if ((s4) curOffset + offsetToSwitch < 0 ||
curOffset + offsetToSwitch + 2 >= insnCount)
{
LOG_VFY("VFY: invalid switch start: at %d, switch offset %d, "
"count %d",
curOffset, offsetToSwitch, insnCount);
return false;
}
/* offset to switch table is a relative branch-style offset */
switchInsns = insns + offsetToSwitch;
/* make sure the table is 32-bit aligned */
if ((((u4) switchInsns) & 0x03) != 0) {
LOG_VFY("VFY: unaligned switch table: at %d, switch offset %d",
curOffset, offsetToSwitch);
return false;
}
switchCount = switchInsns[1];
if ((*insns & 0xff) == OP_PACKED_SWITCH) {
/* 0=sig, 1=count, 2/3=firstKey */
offsetToTargets = 4;
offsetToKeys = -1;
expectedSignature = kPackedSwitchSignature;
} else {
/* 0=sig, 1=count, 2..count*2 = keys */
offsetToKeys = 2;
offsetToTargets = 2 + 2*switchCount;
expectedSignature = kSparseSwitchSignature;
}
tableSize = offsetToTargets + switchCount*2;
if (switchInsns[0] != expectedSignature) {
LOG_VFY("VFY: wrong signature for switch table (0x%04x, wanted 0x%04x)",
switchInsns[0], expectedSignature);
return false;
}
/* make sure the end of the switch is in range */
if (curOffset + offsetToSwitch + tableSize > (u4) insnCount) {
LOG_VFY("VFY: invalid switch end: at %d, switch offset %d, end %d, "
"count %d",
curOffset, offsetToSwitch, curOffset + offsetToSwitch + tableSize,
insnCount);
return false;
}
/* for a sparse switch, verify the keys are in ascending order */
if (offsetToKeys > 0 && switchCount > 1) {
s4 lastKey;
lastKey = switchInsns[offsetToKeys] |
(switchInsns[offsetToKeys+1] << 16);
for (targ = 1; targ < switchCount; targ++) {
s4 key = (s4) switchInsns[offsetToKeys + targ*2] |
(s4) (switchInsns[offsetToKeys + targ*2 +1] << 16);
if (key <= lastKey) {
LOG_VFY("VFY: invalid packed switch: last key=%d, this=%d",
lastKey, key);
return false;
}
lastKey = key;
}
}
/* verify each switch target */
for (targ = 0; targ < switchCount; targ++) {
offset = (s4) switchInsns[offsetToTargets + targ*2] |
(s4) (switchInsns[offsetToTargets + targ*2 +1] << 16);
absOffset = curOffset + offset;
if (absOffset < 0 || absOffset >= (s4)insnCount ||
!dvmInsnIsOpcode(insnFlags, absOffset))
{
LOG_VFY("VFY: invalid switch target %d (-> %#x) at %#x[%d]",
offset, absOffset, curOffset, targ);
return false;
}
dvmInsnSetBranchTarget(insnFlags, absOffset, true);
}
return true;
}
/*
* Verify that the target of a branch instruction is valid.
*
* We don't expect code to jump directly into an exception handler, but
* it's valid to do so as long as the target isn't a "move-exception"
* instruction. We verify that in a later stage.
*
* The VM spec doesn't forbid an instruction from branching to itself,
* but the Dalvik spec declares that only certain instructions can do so.
*
* Updates "insnFlags", setting the "branch target" flag.
*/
static bool checkBranchTarget(const Method* meth, InsnFlags* insnFlags,
int curOffset, bool selfOkay)
{
const int insnCount = dvmGetMethodInsnsSize(meth);
s4 offset, absOffset;
bool isConditional;
if (!dvmGetBranchOffset(meth, insnFlags, curOffset, &offset,
&isConditional))
return false;
if (!selfOkay && offset == 0) {
LOG_VFY_METH(meth, "VFY: branch offset of zero not allowed at %#x",
curOffset);
return false;
}
/*
* Check for 32-bit overflow. This isn't strictly necessary if we can
* depend on the VM to have identical "wrap-around" behavior, but
* it's unwise to depend on that.
*/
if (((s8) curOffset + (s8) offset) != (s8)(curOffset + offset)) {
LOG_VFY_METH(meth, "VFY: branch target overflow %#x +%d",
curOffset, offset);
return false;
}
absOffset = curOffset + offset;
if (absOffset < 0 || absOffset >= insnCount ||
!dvmInsnIsOpcode(insnFlags, absOffset))
{
LOG_VFY_METH(meth,
"VFY: invalid branch target %d (-> %#x) at %#x",
offset, absOffset, curOffset);
return false;
}
dvmInsnSetBranchTarget(insnFlags, absOffset, true);
return true;
}
/*
* Perform static verification on instructions.
*
* As a side effect, this sets the "branch target" flags in InsnFlags.
*
* "(CF)" items are handled during code-flow analysis.
*
* v3 4.10.1
* - target of each jump and branch instruction must be valid
* - targets of switch statements must be valid
* - operands referencing constant pool entries must be valid
* - (CF) operands of getfield, putfield, getstatic, putstatic must be valid
* - (new) verify operands of "quick" field ops
* - (CF) operands of method invocation instructions must be valid
* - (new) verify operands of "quick" method invoke ops
* - (CF) only invoke-direct can call a method starting with '<'
* - (CF) <clinit> must never be called explicitly
* - operands of instanceof, checkcast, new (and variants) must be valid
* - new-array[-type] limited to 255 dimensions
* - can't use "new" on an array class
* - (?) limit dimensions in multi-array creation
* - local variable load/store register values must be in valid range
*
* v3 4.11.1.2
* - branches must be within the bounds of the code array
* - targets of all control-flow instructions are the start of an instruction
* - register accesses fall within range of allocated registers
* - (N/A) access to constant pool must be of appropriate type
* - code does not end in the middle of an instruction
* - execution cannot fall off the end of the code
* - (earlier) for each exception handler, the "try" area must begin and
* end at the start of an instruction (end can be at the end of the code)
* - (earlier) for each exception handler, the handler must start at a valid
* instruction
*/
static bool verifyInstructions(VerifierData* vdata)
{
const Method* meth = vdata->method;
const DvmDex* pDvmDex = meth->clazz->pDvmDex;
InsnFlags* insnFlags = vdata->insnFlags;
const u2* insns = meth->insns;
unsigned int codeOffset;
/* the start of the method is a "branch target" */
dvmInsnSetBranchTarget(insnFlags, 0, true);
for (codeOffset = 0; codeOffset < vdata->insnsSize; /**/) {
/*
* Pull the instruction apart.
*/
int width = dvmInsnGetWidth(insnFlags, codeOffset);
DecodedInstruction decInsn;
bool okay = true;
dexDecodeInstruction(meth->insns + codeOffset, &decInsn);
/*
* Check register, type, class, field, method, and string indices
* for out-of-range values. Do additional checks on branch targets
* and some special cases like new-instance and new-array.
*/
switch (decInsn.opcode) {
case OP_NOP:
case OP_RETURN_VOID:
/* nothing to check */
break;
case OP_MOVE_RESULT:
case OP_MOVE_RESULT_OBJECT:
case OP_MOVE_EXCEPTION:
case OP_RETURN:
case OP_RETURN_OBJECT:
case OP_CONST_4:
case OP_CONST_16:
case OP_CONST:
case OP_CONST_HIGH16:
case OP_MONITOR_ENTER:
case OP_MONITOR_EXIT:
case OP_THROW:
okay &= checkRegisterIndex(meth, decInsn.vA);
break;
case OP_MOVE_RESULT_WIDE:
case OP_RETURN_WIDE:
case OP_CONST_WIDE_16:
case OP_CONST_WIDE_32:
case OP_CONST_WIDE:
case OP_CONST_WIDE_HIGH16:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
break;
case OP_GOTO:
case OP_GOTO_16:
okay &= checkBranchTarget(meth, insnFlags, codeOffset, false);
break;
case OP_GOTO_32:
okay &= checkBranchTarget(meth, insnFlags, codeOffset, true);
break;
case OP_MOVE:
case OP_MOVE_FROM16:
case OP_MOVE_16:
case OP_MOVE_OBJECT:
case OP_MOVE_OBJECT_FROM16:
case OP_MOVE_OBJECT_16:
case OP_ARRAY_LENGTH:
case OP_NEG_INT:
case OP_NOT_INT:
case OP_NEG_FLOAT:
case OP_INT_TO_FLOAT:
case OP_FLOAT_TO_INT:
case OP_INT_TO_BYTE:
case OP_INT_TO_CHAR:
case OP_INT_TO_SHORT:
case OP_ADD_INT_2ADDR:
case OP_SUB_INT_2ADDR:
case OP_MUL_INT_2ADDR:
case OP_DIV_INT_2ADDR:
case OP_REM_INT_2ADDR:
case OP_AND_INT_2ADDR:
case OP_OR_INT_2ADDR:
case OP_XOR_INT_2ADDR:
case OP_SHL_INT_2ADDR:
case OP_SHR_INT_2ADDR:
case OP_USHR_INT_2ADDR:
case OP_ADD_FLOAT_2ADDR:
case OP_SUB_FLOAT_2ADDR:
case OP_MUL_FLOAT_2ADDR:
case OP_DIV_FLOAT_2ADDR:
case OP_REM_FLOAT_2ADDR:
case OP_ADD_INT_LIT16:
case OP_RSUB_INT:
case OP_MUL_INT_LIT16:
case OP_DIV_INT_LIT16:
case OP_REM_INT_LIT16:
case OP_AND_INT_LIT16:
case OP_OR_INT_LIT16:
case OP_XOR_INT_LIT16:
case OP_ADD_INT_LIT8:
case OP_RSUB_INT_LIT8:
case OP_MUL_INT_LIT8:
case OP_DIV_INT_LIT8:
case OP_REM_INT_LIT8:
case OP_AND_INT_LIT8:
case OP_OR_INT_LIT8:
case OP_XOR_INT_LIT8:
case OP_SHL_INT_LIT8:
case OP_SHR_INT_LIT8:
case OP_USHR_INT_LIT8:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
break;
case OP_INT_TO_LONG:
case OP_INT_TO_DOUBLE:
case OP_FLOAT_TO_LONG:
case OP_FLOAT_TO_DOUBLE:
case OP_SHL_LONG_2ADDR:
case OP_SHR_LONG_2ADDR:
case OP_USHR_LONG_2ADDR:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
break;
case OP_LONG_TO_INT:
case OP_LONG_TO_FLOAT:
case OP_DOUBLE_TO_INT:
case OP_DOUBLE_TO_FLOAT:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkWideRegisterIndex(meth, decInsn.vB);
break;
case OP_MOVE_WIDE:
case OP_MOVE_WIDE_FROM16:
case OP_MOVE_WIDE_16:
case OP_DOUBLE_TO_LONG:
case OP_LONG_TO_DOUBLE:
case OP_NEG_DOUBLE:
case OP_NEG_LONG:
case OP_NOT_LONG:
case OP_ADD_LONG_2ADDR:
case OP_SUB_LONG_2ADDR:
case OP_MUL_LONG_2ADDR:
case OP_DIV_LONG_2ADDR:
case OP_REM_LONG_2ADDR:
case OP_AND_LONG_2ADDR:
case OP_OR_LONG_2ADDR:
case OP_XOR_LONG_2ADDR:
case OP_ADD_DOUBLE_2ADDR:
case OP_SUB_DOUBLE_2ADDR:
case OP_MUL_DOUBLE_2ADDR:
case OP_DIV_DOUBLE_2ADDR:
case OP_REM_DOUBLE_2ADDR:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkWideRegisterIndex(meth, decInsn.vB);
break;
case OP_CONST_STRING:
case OP_CONST_STRING_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkStringIndex(pDvmDex, decInsn.vB);
break;
case OP_CONST_CLASS:
case OP_CONST_CLASS_JUMBO:
case OP_CHECK_CAST:
case OP_CHECK_CAST_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkTypeIndex(pDvmDex, decInsn.vB);
break;
case OP_INSTANCE_OF:
case OP_INSTANCE_OF_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkTypeIndex(pDvmDex, decInsn.vC);
break;
case OP_NEW_INSTANCE:
case OP_NEW_INSTANCE_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkNewInstance(pDvmDex, decInsn.vB);
break;
case OP_NEW_ARRAY:
case OP_NEW_ARRAY_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkNewArray(pDvmDex, decInsn.vC);
break;
case OP_FILL_ARRAY_DATA:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkArrayData(meth, codeOffset);
break;
case OP_PACKED_SWITCH:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkSwitchTargets(meth, insnFlags, codeOffset);
break;
case OP_SPARSE_SWITCH:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkSwitchTargets(meth, insnFlags, codeOffset);
break;
case OP_CMPL_FLOAT:
case OP_CMPG_FLOAT:
case OP_AGET:
case OP_AGET_OBJECT:
case OP_AGET_BOOLEAN:
case OP_AGET_BYTE:
case OP_AGET_CHAR:
case OP_AGET_SHORT:
case OP_APUT:
case OP_APUT_OBJECT:
case OP_APUT_BOOLEAN:
case OP_APUT_BYTE:
case OP_APUT_CHAR:
case OP_APUT_SHORT:
case OP_ADD_INT:
case OP_SUB_INT:
case OP_MUL_INT:
case OP_DIV_INT:
case OP_REM_INT:
case OP_AND_INT:
case OP_OR_INT:
case OP_XOR_INT:
case OP_SHL_INT:
case OP_SHR_INT:
case OP_USHR_INT:
case OP_ADD_FLOAT:
case OP_SUB_FLOAT:
case OP_MUL_FLOAT:
case OP_DIV_FLOAT:
case OP_REM_FLOAT:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkRegisterIndex(meth, decInsn.vC);
break;
case OP_AGET_WIDE:
case OP_APUT_WIDE:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkRegisterIndex(meth, decInsn.vC);
break;
case OP_CMPL_DOUBLE:
case OP_CMPG_DOUBLE:
case OP_CMP_LONG:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkWideRegisterIndex(meth, decInsn.vB);
okay &= checkWideRegisterIndex(meth, decInsn.vC);
break;
case OP_ADD_DOUBLE:
case OP_SUB_DOUBLE:
case OP_MUL_DOUBLE:
case OP_DIV_DOUBLE:
case OP_REM_DOUBLE:
case OP_ADD_LONG:
case OP_SUB_LONG:
case OP_MUL_LONG:
case OP_DIV_LONG:
case OP_REM_LONG:
case OP_AND_LONG:
case OP_OR_LONG:
case OP_XOR_LONG:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkWideRegisterIndex(meth, decInsn.vB);
okay &= checkWideRegisterIndex(meth, decInsn.vC);
break;
case OP_SHL_LONG:
case OP_SHR_LONG:
case OP_USHR_LONG:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkWideRegisterIndex(meth, decInsn.vB);
okay &= checkRegisterIndex(meth, decInsn.vC);
break;
case OP_IF_EQ:
case OP_IF_NE:
case OP_IF_LT:
case OP_IF_GE:
case OP_IF_GT:
case OP_IF_LE:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkBranchTarget(meth, insnFlags, codeOffset, false);
break;
case OP_IF_EQZ:
case OP_IF_NEZ:
case OP_IF_LTZ:
case OP_IF_GEZ:
case OP_IF_GTZ:
case OP_IF_LEZ:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkBranchTarget(meth, insnFlags, codeOffset, false);
break;
case OP_IGET:
case OP_IGET_JUMBO:
case OP_IGET_OBJECT:
case OP_IGET_OBJECT_JUMBO:
case OP_IGET_BOOLEAN:
case OP_IGET_BOOLEAN_JUMBO:
case OP_IGET_BYTE:
case OP_IGET_BYTE_JUMBO:
case OP_IGET_CHAR:
case OP_IGET_CHAR_JUMBO:
case OP_IGET_SHORT:
case OP_IGET_SHORT_JUMBO:
case OP_IPUT:
case OP_IPUT_JUMBO:
case OP_IPUT_OBJECT:
case OP_IPUT_OBJECT_JUMBO:
case OP_IPUT_BOOLEAN:
case OP_IPUT_BOOLEAN_JUMBO:
case OP_IPUT_BYTE:
case OP_IPUT_BYTE_JUMBO:
case OP_IPUT_CHAR:
case OP_IPUT_CHAR_JUMBO:
case OP_IPUT_SHORT:
case OP_IPUT_SHORT_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkFieldIndex(pDvmDex, decInsn.vC);
break;
case OP_IGET_WIDE:
case OP_IGET_WIDE_JUMBO:
case OP_IPUT_WIDE:
case OP_IPUT_WIDE_JUMBO:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkRegisterIndex(meth, decInsn.vB);
okay &= checkFieldIndex(pDvmDex, decInsn.vC);
break;
case OP_SGET:
case OP_SGET_JUMBO:
case OP_SGET_OBJECT:
case OP_SGET_OBJECT_JUMBO:
case OP_SGET_BOOLEAN:
case OP_SGET_BOOLEAN_JUMBO:
case OP_SGET_BYTE:
case OP_SGET_BYTE_JUMBO:
case OP_SGET_CHAR:
case OP_SGET_CHAR_JUMBO:
case OP_SGET_SHORT:
case OP_SGET_SHORT_JUMBO:
case OP_SPUT:
case OP_SPUT_JUMBO:
case OP_SPUT_OBJECT:
case OP_SPUT_OBJECT_JUMBO:
case OP_SPUT_BOOLEAN:
case OP_SPUT_BOOLEAN_JUMBO:
case OP_SPUT_BYTE:
case OP_SPUT_BYTE_JUMBO:
case OP_SPUT_CHAR:
case OP_SPUT_CHAR_JUMBO:
case OP_SPUT_SHORT:
case OP_SPUT_SHORT_JUMBO:
okay &= checkRegisterIndex(meth, decInsn.vA);
okay &= checkFieldIndex(pDvmDex, decInsn.vB);
break;
case OP_SGET_WIDE:
case OP_SGET_WIDE_JUMBO:
case OP_SPUT_WIDE:
case OP_SPUT_WIDE_JUMBO:
okay &= checkWideRegisterIndex(meth, decInsn.vA);
okay &= checkFieldIndex(pDvmDex, decInsn.vB);
break;
case OP_FILLED_NEW_ARRAY:
/* decoder uses B, not C, for type ref */
okay &= checkTypeIndex(pDvmDex, decInsn.vB);
okay &= checkVarargRegs(meth, &decInsn);
break;
case OP_FILLED_NEW_ARRAY_RANGE:
case OP_FILLED_NEW_ARRAY_JUMBO:
okay &= checkTypeIndex(pDvmDex, decInsn.vB);
okay &= checkVarargRangeRegs(meth, &decInsn);
break;
case OP_INVOKE_VIRTUAL:
case OP_INVOKE_SUPER:
case OP_INVOKE_DIRECT:
case OP_INVOKE_STATIC:
case OP_INVOKE_INTERFACE:
/* decoder uses B, not C, for type ref */
okay &= checkMethodIndex(pDvmDex, decInsn.vB);
okay &= checkVarargRegs(meth, &decInsn);
break;
case OP_INVOKE_VIRTUAL_RANGE:
case OP_INVOKE_VIRTUAL_JUMBO:
case OP_INVOKE_SUPER_RANGE:
case OP_INVOKE_SUPER_JUMBO:
case OP_INVOKE_DIRECT_RANGE:
case OP_INVOKE_DIRECT_JUMBO:
case OP_INVOKE_STATIC_RANGE:
case OP_INVOKE_STATIC_JUMBO:
case OP_INVOKE_INTERFACE_RANGE:
case OP_INVOKE_INTERFACE_JUMBO:
okay &= checkMethodIndex(pDvmDex, decInsn.vB);
okay &= checkVarargRangeRegs(meth, &decInsn);
break;
/* verifier/optimizer output; we should never see these */
case OP_IGET_VOLATILE:
case OP_IPUT_VOLATILE:
case OP_SGET_VOLATILE:
case OP_SPUT_VOLATILE:
case OP_IGET_OBJECT_VOLATILE:
case OP_IPUT_OBJECT_VOLATILE:
case OP_SGET_OBJECT_VOLATILE:
case OP_SPUT_OBJECT_VOLATILE:
case OP_IGET_WIDE_VOLATILE:
case OP_IPUT_WIDE_VOLATILE:
case OP_SGET_WIDE_VOLATILE:
case OP_SPUT_WIDE_VOLATILE:
case OP_IGET_VOLATILE_JUMBO:
case OP_IPUT_VOLATILE_JUMBO:
case OP_SGET_VOLATILE_JUMBO:
case OP_SPUT_VOLATILE_JUMBO:
case OP_IGET_OBJECT_VOLATILE_JUMBO:
case OP_IPUT_OBJECT_VOLATILE_JUMBO:
case OP_SGET_OBJECT_VOLATILE_JUMBO:
case OP_SPUT_OBJECT_VOLATILE_JUMBO:
case OP_IGET_WIDE_VOLATILE_JUMBO:
case OP_IPUT_WIDE_VOLATILE_JUMBO:
case OP_SGET_WIDE_VOLATILE_JUMBO:
case OP_SPUT_WIDE_VOLATILE_JUMBO:
case OP_BREAKPOINT:
case OP_THROW_VERIFICATION_ERROR:
case OP_THROW_VERIFICATION_ERROR_JUMBO:
case OP_EXECUTE_INLINE:
case OP_EXECUTE_INLINE_RANGE:
case OP_INVOKE_OBJECT_INIT_RANGE:
case OP_INVOKE_OBJECT_INIT_JUMBO:
case OP_RETURN_VOID_BARRIER:
case OP_IGET_QUICK:
case OP_IGET_WIDE_QUICK:
case OP_IGET_OBJECT_QUICK:
case OP_IPUT_QUICK:
case OP_IPUT_WIDE_QUICK:
case OP_IPUT_OBJECT_QUICK:
case OP_INVOKE_VIRTUAL_QUICK:
case OP_INVOKE_VIRTUAL_QUICK_RANGE:
case OP_INVOKE_SUPER_QUICK:
case OP_INVOKE_SUPER_QUICK_RANGE:
case OP_UNUSED_3E:
case OP_UNUSED_3F:
case OP_UNUSED_40:
case OP_UNUSED_41:
case OP_UNUSED_42:
case OP_UNUSED_43:
case OP_UNUSED_73:
case OP_UNUSED_79:
case OP_UNUSED_7A:
case OP_DISPATCH_FF:
case OP_UNUSED_27FF:
case OP_UNUSED_28FF:
case OP_UNUSED_29FF:
case OP_UNUSED_2AFF:
case OP_UNUSED_2BFF:
case OP_UNUSED_2CFF:
case OP_UNUSED_2DFF:
case OP_UNUSED_2EFF:
case OP_UNUSED_2FFF:
case OP_UNUSED_30FF:
case OP_UNUSED_31FF:
case OP_UNUSED_32FF:
case OP_UNUSED_33FF:
case OP_UNUSED_34FF:
case OP_UNUSED_35FF:
case OP_UNUSED_36FF:
case OP_UNUSED_37FF:
case OP_UNUSED_38FF:
case OP_UNUSED_39FF:
case OP_UNUSED_3AFF:
case OP_UNUSED_3BFF:
case OP_UNUSED_3CFF:
case OP_UNUSED_3DFF:
case OP_UNUSED_3EFF:
case OP_UNUSED_3FFF:
case OP_UNUSED_40FF:
case OP_UNUSED_41FF:
case OP_UNUSED_42FF:
case OP_UNUSED_43FF:
case OP_UNUSED_44FF:
case OP_UNUSED_45FF:
case OP_UNUSED_46FF:
case OP_UNUSED_47FF:
case OP_UNUSED_48FF:
case OP_UNUSED_49FF:
case OP_UNUSED_4AFF:
case OP_UNUSED_4BFF:
case OP_UNUSED_4CFF:
case OP_UNUSED_4DFF:
case OP_UNUSED_4EFF:
case OP_UNUSED_4FFF:
case OP_UNUSED_50FF:
case OP_UNUSED_51FF:
case OP_UNUSED_52FF:
case OP_UNUSED_53FF:
case OP_UNUSED_54FF:
case OP_UNUSED_55FF:
case OP_UNUSED_56FF:
case OP_UNUSED_57FF:
case OP_UNUSED_58FF:
case OP_UNUSED_59FF:
case OP_UNUSED_5AFF:
case OP_UNUSED_5BFF:
case OP_UNUSED_5CFF:
case OP_UNUSED_5DFF:
case OP_UNUSED_5EFF:
case OP_UNUSED_5FFF:
case OP_UNUSED_60FF:
case OP_UNUSED_61FF:
case OP_UNUSED_62FF:
case OP_UNUSED_63FF:
case OP_UNUSED_64FF:
case OP_UNUSED_65FF:
case OP_UNUSED_66FF:
case OP_UNUSED_67FF:
case OP_UNUSED_68FF:
case OP_UNUSED_69FF:
case OP_UNUSED_6AFF:
case OP_UNUSED_6BFF:
case OP_UNUSED_6CFF:
case OP_UNUSED_6DFF:
case OP_UNUSED_6EFF:
case OP_UNUSED_6FFF:
case OP_UNUSED_70FF:
case OP_UNUSED_71FF:
case OP_UNUSED_72FF:
case OP_UNUSED_73FF:
case OP_UNUSED_74FF:
case OP_UNUSED_75FF:
case OP_UNUSED_76FF:
case OP_UNUSED_77FF:
case OP_UNUSED_78FF:
case OP_UNUSED_79FF:
case OP_UNUSED_7AFF:
case OP_UNUSED_7BFF:
case OP_UNUSED_7CFF:
case OP_UNUSED_7DFF:
case OP_UNUSED_7EFF:
case OP_UNUSED_7FFF:
case OP_UNUSED_80FF:
case OP_UNUSED_81FF:
case OP_UNUSED_82FF:
case OP_UNUSED_83FF:
case OP_UNUSED_84FF:
case OP_UNUSED_85FF:
case OP_UNUSED_86FF:
case OP_UNUSED_87FF:
case OP_UNUSED_88FF:
case OP_UNUSED_89FF:
case OP_UNUSED_8AFF:
case OP_UNUSED_8BFF:
case OP_UNUSED_8CFF:
case OP_UNUSED_8DFF:
case OP_UNUSED_8EFF:
case OP_UNUSED_8FFF:
case OP_UNUSED_90FF:
case OP_UNUSED_91FF:
case OP_UNUSED_92FF:
case OP_UNUSED_93FF:
case OP_UNUSED_94FF:
case OP_UNUSED_95FF:
case OP_UNUSED_96FF:
case OP_UNUSED_97FF:
case OP_UNUSED_98FF:
case OP_UNUSED_99FF:
case OP_UNUSED_9AFF:
case OP_UNUSED_9BFF:
case OP_UNUSED_9CFF:
case OP_UNUSED_9DFF:
case OP_UNUSED_9EFF:
case OP_UNUSED_9FFF:
case OP_UNUSED_A0FF:
case OP_UNUSED_A1FF:
case OP_UNUSED_A2FF:
case OP_UNUSED_A3FF:
case OP_UNUSED_A4FF:
case OP_UNUSED_A5FF:
case OP_UNUSED_A6FF:
case OP_UNUSED_A7FF:
case OP_UNUSED_A8FF:
case OP_UNUSED_A9FF:
case OP_UNUSED_AAFF:
case OP_UNUSED_ABFF:
case OP_UNUSED_ACFF:
case OP_UNUSED_ADFF:
case OP_UNUSED_AEFF:
case OP_UNUSED_AFFF:
case OP_UNUSED_B0FF:
case OP_UNUSED_B1FF:
case OP_UNUSED_B2FF:
case OP_UNUSED_B3FF:
case OP_UNUSED_B4FF:
case OP_UNUSED_B5FF:
case OP_UNUSED_B6FF:
case OP_UNUSED_B7FF:
case OP_UNUSED_B8FF:
case OP_UNUSED_B9FF:
case OP_UNUSED_BAFF:
case OP_UNUSED_BBFF:
case OP_UNUSED_BCFF:
case OP_UNUSED_BDFF:
case OP_UNUSED_BEFF:
case OP_UNUSED_BFFF:
case OP_UNUSED_C0FF:
case OP_UNUSED_C1FF:
case OP_UNUSED_C2FF:
case OP_UNUSED_C3FF:
case OP_UNUSED_C4FF:
case OP_UNUSED_C5FF:
case OP_UNUSED_C6FF:
case OP_UNUSED_C7FF:
case OP_UNUSED_C8FF:
case OP_UNUSED_C9FF:
case OP_UNUSED_CAFF:
case OP_UNUSED_CBFF:
case OP_UNUSED_CCFF:
case OP_UNUSED_CDFF:
case OP_UNUSED_CEFF:
case OP_UNUSED_CFFF:
case OP_UNUSED_D0FF:
case OP_UNUSED_D1FF:
case OP_UNUSED_D2FF:
case OP_UNUSED_D3FF:
case OP_UNUSED_D4FF:
case OP_UNUSED_D5FF:
case OP_UNUSED_D6FF:
case OP_UNUSED_D7FF:
case OP_UNUSED_D8FF:
case OP_UNUSED_D9FF:
case OP_UNUSED_DAFF:
case OP_UNUSED_DBFF:
case OP_UNUSED_DCFF:
case OP_UNUSED_DDFF:
case OP_UNUSED_DEFF:
case OP_UNUSED_DFFF:
case OP_UNUSED_E0FF:
case OP_UNUSED_E1FF:
case OP_UNUSED_E2FF:
case OP_UNUSED_E3FF:
case OP_UNUSED_E4FF:
case OP_UNUSED_E5FF:
case OP_UNUSED_E6FF:
case OP_UNUSED_E7FF:
case OP_UNUSED_E8FF:
case OP_UNUSED_E9FF:
case OP_UNUSED_EAFF:
case OP_UNUSED_EBFF:
case OP_UNUSED_ECFF:
case OP_UNUSED_EDFF:
case OP_UNUSED_EEFF:
case OP_UNUSED_EFFF:
case OP_UNUSED_F0FF:
case OP_UNUSED_F1FF:
LOGE("VFY: unexpected opcode %04x", decInsn.opcode);
okay = false;
break;
/*
* DO NOT add a "default" clause here. Without it the compiler will
* complain if an instruction is missing (which is desirable).
*/
}
if (!okay) {
LOG_VFY_METH(meth, "VFY: rejecting opcode 0x%02x at 0x%04x",
decInsn.opcode, codeOffset);
return false;
}
OpcodeFlags opFlags = dexGetFlagsFromOpcode(decInsn.opcode);
if ((opFlags & VERIFY_GC_INST_MASK) != 0) {
/*
* This instruction is a GC point. If space is a concern,
* the set of GC points could be reduced by eliminating
* foward branches.
*
* TODO: we could also scan the targets of a "switch" statement,
* and if none of them branch backward we could ignore that
* instruction as well.
*/
dvmInsnSetGcPoint(insnFlags, codeOffset, true);
}
assert(width > 0);
codeOffset += width;
insns += width;
}
/* make sure the last instruction ends at the end of the insn area */
if (codeOffset != vdata->insnsSize) {
LOG_VFY_METH(meth,
"VFY: code did not end when expected (end at %d, count %d)",
codeOffset, vdata->insnsSize);
return false;
}
return true;
}